Bedienungsanleitung Brother ADS-2200 (Seite 151 von 208) (Englisch)

718490

151

Zoom out

Zoom in

Vorherige Seite

1/208

Nächste Seite

Home > Troubleshooting > If You Are Having Difficulty with Your Machine > Network Problems > If You

Cannot Complete the Wireless Network Setup Configuration

If You Cannot Complete the Wireless Network Setup Configuration

Related Models: ADS-2700W

Turn your wireless router off and back on. If that does not resolve the problem, try to configure the wireless

settings again. If this still does not resolve the problem, use the Actions listed in this table.

Cause

Action Interface

Your security settings (SSID/

Network Key (Password))

are not correct.

Confirm your security settings.

• The manufacturer’s name or model number of the wireless

access point/router may be used as the default security settings.

• See the instructions supplied with your wireless access point/

router for information on how to find the security settings.

• Ask the manufacturer of your wireless access point/router, your

Internet provider, or your network administrator.

Wireless

Your Brother machine's MAC

address is not allowed.

Confirm that the Brother machine's MAC Address is allowed in the

filter. You can find the MAC address using the Brother machine’s

control panel.

Wireless

Your wireless access point/

router is in stealth mode (not

broadcasting the SSID).

• Enter the correct Network Name (SSID) and Network Key

(Password) manually.

• Check the Network Name (SSID) and Network Key (Password)

in the instructions supplied with your wireless access point/router

and reconfigure the wireless network setup.

Wireless

Your security settings (SSID/

Password) are not correct.

Confirm the Network Name (SSID) and Network Key (Password).

When you are configuring the network manually, the SSID and

password are displayed on your Brother machine. If your mobile

device supports the manual configuration, the SSID and password

will be displayed on your mobile device’s screen.

Wi-Fi Direct

Your Brother machine is

placed too far from your

mobile device.

Move your Brother machine within about 1 metre of the mobile

device when you configure the Wi-Fi Direct network settings.

Wi-Fi Direct

There are some obstructions

(walls or furniture, for

example) between your

machine and the mobile

device.

Move your Brother machine to an obstruction-free area. Wi-Fi Direct

There is a wireless

computer, Bluetooth-

supported device,

microwave oven, or digital

cordless phone near the

Brother machine or the

mobile device.

Move other devices away from the Brother machine or the mobile

device.

Wi-Fi Direct

If you have checked and

tried all of the actions, but

still cannot complete the Wi-

Fi Direct configuration.

Turn your Brother machine off and back on. Then try to configure the

Wi-Fi Direct settings again.

Wi-Fi Direct

Your machine is in Sleep

Mode and cannot configure

the network settings on Web

Based Management.

Turn off the Sleep Mode. Wireless

The enterprise wireless

network is not configured

correctly.

Configure the settings in Web Based Management. Wireless

147

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother ADS-2200 Seite 151

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother ADS-2200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info