Bedienungsanleitung Brother Brother Innov-is XJ1 (Seite 62 von 212) (Englisch)

718772

Zoom out

Zoom in

Vorherige Seite

1/212

Nächste Seite

SEWING

stitch button) or (Reinforcement stitch button) to

sew reverse stitches (or reinforcement stitches)

automatically at the end of sewing (Refer to the next

procedure “Automatic Reverse/Reinforcement

Stitching”.).

The operation performed when the button is pressed

differs depending on the selected stitch pattern. (Refer

to “STITCH SETTING CHART” on page 194.)

Automatic Reverse/Reinforcement Stitching

After selecting a stitch motif, turn on the automatic

reinforcement stitching function before sewing, and the

machine will automatically sew reinforcement stitches

(or reverse stitches, depending on the stitch motif) at the

beginning and end of sewing.

Select a stitch pattern.

Press to set the automatic reinforcement stitching

function.

 The key will display as .

Set the fabric in the start position and start sewing.

1 Reverse stitches (or reinforcement stitches)

 The machine will automatically sew reverse stitches

(or reinforcement stitches) and then continue sewing.

Press (Reverse stitch button) or

(Reinforcement stitch button).

1 Reverse stitches (or reinforcement stitches)

 The machine will sew reverse stitches (or

reinforcement stitches) and stop.

The operation performed when the button is pressed

differs depending on the selected stitch pattern. Refer to

the following table for details on the operation that is

performed when the button is pressed.

1 Reverse stitch

2 Reinforcement stitch

Memo

• Some stitches, such as buttonholes and bar tacks,

require reinforcement stitches at the beginning of

sewing. If you select one of these stitches, the

machine will automatically turn on this function (the

key appears as when the stitch is selected).

(Reverse stitch

button)

(Reinforcement

stitch button)

Machine sews

reverse stitches

while holding

(Reverse stitch

button).

Machine sews 3 – 5

reinforcement

stitches while

holding

(Reinforcement

stitch button).

Machine sews

reverse stitches

while holding

(Reverse stitch

button).*

Machine sews 3 – 5

reinforcement

stitches while

holding

(Reinforcement

stitch button).

with a stitch

other than reverse or

reinforcement stitch

pattern selected.

Machine sews 3 – 5

reinforcement

stitches while

holding

(Reverse stitch

button).

Machine sews 3 – 5

reinforcement

stitches while

holding

(Reinforcement

stitch button).

Machine sews

reinforcement

stitches while

holding

(Reverse stitch

button).

Machine sews

reinforcement

stitches after

completing the stitch

pattern, when

(Reinforcement

stitch button) is

pressed.

Machine sews

reverse stitches and

stops sewing when

the (Reverse

stitch button) is

pressed.

(At the beginning of

sewing, reverse

stitches are sewn

automatically when

“Start/Stop” button

is pressed.)

Machine sews

reinforcement

stitches and stops

sewing when

(Reinforcement

stitch button) is

pressed.

(At the beginning of

sewing, reverse

stitches are sewn

automatically when

“Start/Stop” button

is pressed.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother Brother Innov-is XJ1 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother Brother Innov-is XJ1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info