718772
98
Zoom out
Zoom in
Vorherige Seite
1/212
Nächste Seite
UTILITY STITCHES
96
b
Attach presser foot “J” and sew straight stitches up to
the zipper opening. Change to a basting stitch and sew
to the top of the fabric.
c
Press the seam allowance open and align the folded
hem along the teeth of the zipper, while maintaining 3
mm (approx. 1/8 inch) of sewing space.
d
Remove presser foot “J”.
e
Align the right side of the pin in zipper foot “I” with
the presser foot holder, and attach the presser foot.
f
Set the presser foot in the 3 mm (approx. 1/8 inch)
margin.
g
Starting from the end of the zipper opening, sew to a
point about 5 cm (2 inches) from the edge of the fabric,
then stop the machine.
h
Pull down the zipper slider, then continue sewing to
the edge of the fabric.
i
Close the zipper, turn the fabric over, and sew a
basting stitch.
j
Remove the presser foot, and reattach it so that the left
side of the pin is attached to the presser foot holder.
* When sewing the left side of the zipper, the needle
should drop on the right side of the presser foot.
When sewing the right side of the zipper, the needle
should drop on the left side of the presser foot.
k
Set the fabric so that the left edge of the presser foot
touches the edge of the zipper teeth.
l
Sew reverse stitches at the top of the zipper, then
continue sewing.
m
Stop sewing about 5 cm (2 inches) from the edge of the
fabric, leave the needle in the fabric, and remove the
basting stitches.
n
Open the zipper and sew the rest of the seam.
1 Reverse stitches
2 Wrong side of fabric
3 Basting stitches
4 End of zipper opening
1 Zipper pull tab
2 Wrong side of fabric
3 Zipper teeth
4 End of zipper opening
5 3 mm (approx. 1/8
inch)
1 Right
2 Left
3 Needle
drop point
1 About 5 cm ( 2
inches)
2 3 mm (approx. 1/8
inch)
1 Front of the skirt
(wrong side of
fabric)
2 Basting stitches
3 Front of the skirt
(right side of
fabric)
4 Back of the skirt
(right side of
fabric)
a
b
c
d
a
b
c
d
e
a
b
c
a
b
1 Right
2 Left
3 Needle
drop point
1 Basting
stitches
2 7 to 10 mm
(approx. 1/4
inch to 3/8
inch)
3 Reverse
stitches
4 About 5 cm ( 2
inches)
a
b
c
a
b
c
d
98

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother Brother Innov-is XJ1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother Brother Innov-is XJ1

Brother Brother Innov-is XJ1 Bedienungsanleitung - Deutsch - 212 seiten

Brother Brother Innov-is XJ1 Bedienungsanleitung - Holländisch - 212 seiten

Brother Brother Innov-is XJ1 Bedienungsanleitung - Französisch - 212 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info