718826
19
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
17
1
Memo
The smaller the thread number, the thicker the
thread; and the larger the needle number, the
thicker the needle.
Use the ball point needle when sewing on stretch
fabrics or fabrics where skipped stitches easily
occur.
Use a 90/14 to 100/16 needle with transparent
nylon threads, regardless of the fabric being sewn.
Ball point needle
Use the ball point needle when sewing on stretch
fabrics or fabrics where skipped stitches easily
occur.
Use the ball point needle for best results when
sewing patterns using monogramming foot “N”.
Transparent nylon thread
Use a 90/14 to 100/16 needle, regardless of the
fabric or thread.
Sewing with a bent needle is extremely dangerous
since the needle may break while the machine is being
operated.
Before using the needle, place the flat side of the
needle on a flat surface and check that the distance
between the needle and the flat surface is even.
a
Raise the needle by turning the handwheel
toward you (counterclockwise) so that the mark
on the wheel points up. (With models equipped
with (needle position button), raise the
needle by pressing once or twice.)
b
Turn off the sewing machine.
c
Lower the presser foot lever.
CAUTION
The appropriate fabric, thread and needle
combinations are shown in the preceding table.
If the combination of the fabric, thread and
needle is not correct, particularly when sewing
thick fabrics (such as denim) with thin needles
(such as 65/9 to 75/11), the needle may bend or
break. In addition, the stitching may be uneven
or puckered or there may be skipped stitches.
Checking the needle
1
2
a Flat side
b Needle type marking
3
4
c Flat surface
d Even
3
5
e Not even
Replacing the needle
a Mark b Needle position button
CAUTION
Before replacing the needle, be sure to turn off
the sewing machine, otherwise injuries may
occur if the foot controller or the start/stop
button is accidentally pressed and the machine
starts sewing.
or
a Presser foot lever
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother CS70 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother CS70

Brother CS70 Kurzanleitung - Deutsch - 2 seiten

Brother CS70 Bedienungsanleitung - Deutsch - 60 seiten

Brother CS70 Kurzanleitung - Englisch, Holländisch - 2 seiten

Brother CS70 Bedienungsanleitung - Holländisch - 60 seiten

Brother CS70 Kurzanleitung - Französisch - 2 seiten

Brother CS70 Bedienungsanleitung - Französisch - 60 seiten

Brother CS70 Kurzanleitung - Italienisch, Spanisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info