718826
22
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
20
KNOWING YOUR SEWING MACHINE
Replace the presser foot as described below.
a
Raise the needle by turning the handwheel
toward you (counterclockwise) so that the mark
on the wheel points up. (With models equipped
with (needle position button), raise the
needle by pressing once or twice.)
b
If the sewing machine has been turned on, turn
it off.
c
Raise the presser foot lever.
d
Press the black button release the presser foot.
e
Place a different presser foot below the holder
so that the presser foot pin is aligned with the
shank in the holder.
Position the presser foot so the letter indicating
the presser foot type (J, A, etc.) is positioned to be
read.
Note
The presser foot to be used with each stitch
appears in the LCD. To select a stitch, refer to
“Selecting stitching” (page 22).
f
Slowly lower the presser foot lever so that the
presser foot pin snaps into the shank.
a Presser foot lever
The presser foot is attached.
g
Raise the presser foot lever to check that the
presser foot is securely attached.
REPLACING THE PRESSER FOOT
CAUTION
Always turn off the power before you change
the presser foot. If you leave the power on and
step on the controller, the machine will start
and you may be injured.
Always use the correct presser foot for the stitch
pattern you have chosen. If you use the wrong
presser foot, the needle may strike the presser
foot and bend or break, and may cause injury.
Only use presser feet that have been designed to
be used with this machine. Using other any
presser feet may cause an accident or injury.
Replacing the presser foot
a Mark b Needle position button
CAUTION
Before replacing the presser foot, be sure to
turn off the sewing machine, otherwise injuries
may occur if the foot controller or the start/stop
button is accidentally pressed and the machine
starts sewing.
or
a Black button
a Presser foot holder
b Shank
c Pin
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother CS70 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother CS70

Brother CS70 Kurzanleitung - Deutsch - 2 seiten

Brother CS70 Bedienungsanleitung - Deutsch - 60 seiten

Brother CS70 Kurzanleitung - Englisch, Holländisch - 2 seiten

Brother CS70 Bedienungsanleitung - Holländisch - 60 seiten

Brother CS70 Kurzanleitung - Französisch - 2 seiten

Brother CS70 Bedienungsanleitung - Französisch - 60 seiten

Brother CS70 Kurzanleitung - Italienisch, Spanisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info