718892
22
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
20
Threading the top cover
spreader
NOTE:
Thread the top cover thread after first sewing a
cover stitch seam.
Needle threads used by the various
stitches
The triple top cover stitch (three-needle, five-
thread) uses the left needle thread, center needle
thread and right needle thread.
The top cover two-needle, four-thread cover stitch
(Wide) (6 mm (15/64 inch)) uses the left needle
thread and right needle thread.
The top cover two-needle, four-thread cover stitch
(Narrow) (3 mm (1/8 inch)) uses the center needle
thread and right needle thread.
Run the thread in the sequence illustrated,
following the purple color and the numbers next to
each threading point.
3
3
4
5
6
7
8
9
0
2
1
4
3
A
1. Pull the thread off the spool and directly up
through thread holder
1
and thread holder
2
on the thread tree, from back to front.
2. Pass each thread through
3
, shown in the
illustration.
3. Pass the thread through the tension disc
4
in
the channel next to the tension dial marked with
a purple
.
4. Guide the thread down the channel and across
through threading points
5
-
9
next to the color
marks, following the numerical order in the
illustration.
5.
Turn the handwheel counterclockwise to move the
point of the top cover spreader completely to the left.
6. Thread the point of the top cover spreader as
shown in the illustration
0
.
7. Pass the top cover thread under the presser
foot, from left to right, as shown in the
illustration
A
, and then lower the presser foot.
8.
Turn the handwheel counterclockwise 2 to 3 times
to check that the top cover thread forms stitches.
After checking the stitching, use scissors to cut any
excess thread, for example, if the top cover thread
is too long or the top cover thread became tangled.
NOTE:
When using thick thread, such as decorative
thread, as the top cover thread, run the thread as
shown in the illustration.
A
Do not run the thread through
A
.
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

brother-cv-3550

Suche zurücksetzen

  • Der Fußanlasser reagiert zu spät und dann näht die Maschine ganz schnell. Ein langsames Nähen ist nicht möglich.
    Eingereicht am 8-2-2022 19:12

    Antworten Frage melden
  • ich kann die frohntabdeckung nich richtig zuklapen Eingereicht am 16-8-2021 11:48

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother CV-3550 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother CV-3550

Brother CV-3550 Bedienungsanleitung - Deutsch - 68 seiten

Brother CV-3550 Bedienungsanleitung - Holländisch, Französisch - 68 seiten

Brother CV-3550 Bedienungsanleitung - Italienisch - 68 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info