Bedienungsanleitung Brother DCP-110C (Seite 74 von 107) (Englisch, Holländisch)

19826

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

5 - 7 TROUBLESHOOTING AND ROUTINE MAINTENANCE

Smudged stain at the top

center of the printed page.

Make sure the paper is not too thick or not curled. (See About paper on

page 1-6.)

Printing appears dirty or ink

seems to run.

Make sure you are using the proper types of paper. (See About paper

on page 1-6.) Don’t handle the paper until the ink is dry.

Stains appear on the reverse

side or at the bottom of the

page.

Make sure the Printer Platen is not dirty with ink. (See Cleaning the DCP

printer platen

on page 5-19.)

Make sure you are using the paper support flap. (See How to load

paper, envelopes and post cards on page 1-11.)

There are some dense lines. Check ‘Reverse Order’ in the Basic tab of the printer driver.

The printouts are wrinkled. In the printer driver ‘Basic’ tab, click the ‘Settings’, and uncheck the

‘Bi-Directional Printing’.

Cannot perform ‘2 in 1 or 4 in 1’

printing.

Check that the paper size setting in the application and in the printer

driver are the same.

Print speed is too slow. Changing the printer driver setting may improve the print speed.

Highest resolution needs longer data processing, transfer and printing

time. Try the other settings of quality in the printer driver ‘Basic’ tab.

Also, click the ‘Settings’ tab, and make sure you uncheck the Color

Enhancement.

Borderless printing is slower than normal printing. If you want to print

more quickly, set the Borderless feature off. (See Borderless on page

3-14.)

Color Enhancement

(True2Life

) is not working

properly.

If the image data is not full color in your application (Such as 256 color),

color Enhancement (True2Life

) will not work. Please use at least 24 bit

color data with the Color Enhancement (True2Life

) feature.

DCP feeds multiple pages Make sure the paper is loaded properly in the paper tray. (See

How to

load paper, envelopes and post cards on page 1-11.)

Check that more than two types of paper are not loaded in the paper tray

at any one time.

Printed pages are not stacked

neatly.

Make sure you are using the paper support flap. (See How to load

paper, envelopes and post cards on page 1-11.)

DCP does not print from Paint

Brush.

Try setting the Display setting to ‘256 colors.’

DCP does not print from

Adobe Illustrator.

Try to reduce the print resolution.

Copying Difficulties

Vertical streaks appear in

copies.

Sometimes you may see vertical streaks on copies. Clean the scanner.

(See Cleaning the scanner on page 5-18.)

Scanning Difficulties

TWAIN/WIA errors appear

while scanning.

Make sure the Brother TWAIN/WIA driver is selected as the primary

source. In PaperPort

, click Scan in the File menu and select the

Brother TWAIN/WIA driver.

DIFFICULTY SUGGESTIONS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother DCP-110C Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother DCP-110C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info