Bedienungsanleitung Brother DCP-157C (Seite 64 von 99) (Englisch)

451162

Zoom out

Zoom in

Vorherige Seite

1/99

Nächste Seite

Printed text or images are skewed. Make sure the paper is loaded properly in the paper tray and the paper side guide

is adjusted correctly. (See Loading paper and other media on page 14.)

Make sure the Jam Clear cover is set properly.

Smudged stain at the top center of

the printed page.

Make sure the paper is not too thick or curled. (See Acceptable paper and other

media on page 10.)

Printing appears dirty or ink seems

to run.

Make sure you are using the recommended types of paper. (See Acceptable

paper and other media on page 10.) Don't handle the paper until the ink is dry.

Stains appear on the reverse side

or at the bottom of the page.

Make sure the printer platen is not dirty with ink. (See Cleaning the machine printer

platen on page 66.)

Make sure you are using the paper support flap. (See Loading paper and other

media on page 14.)

The machine prints dense lines on

the page.

Check Reverse Order in the Basic tab of the printer driver.

The printouts are wrinkled. In the printer driver Basic tab, click Settings, and uncheck Bi-Directional

Printing.

Cannot perform ‘2 in 1

’ or ‘4 in 1 ’

printing.

Check that the paper size setting in the application and in the printer driver are the

same.

Print speed is too slow. Try changing the printer driver setting. The highest resolution needs longer data

processing, sending and printing time. Try the other quality settings in the printer

driver Basic tab. Also, click the Settings tab, and make sure you uncheck Colour

Enhancement.

Set the borderless feature off. Borderless printing is slower than normal printing.

(See Printing for Windows

or Printing and Faxing for Macintosh

in the Software

User's Guide on the CD-ROM.)

Colour Enhancement is not

working properly.

If the image data is not full colour in your application (such as 256 colour), Colour

Enhancement will not work. Use at least 24 bit colour data with the Colour

Enhancement feature.

Machine feeds multiple pages Make sure the paper is loaded properly in the paper tray. (See Loading paper and

other media on page 14.)

Check that more than two types of paper are not loaded in the paper tray at any

one time.

Printed pages are not stacked

neatly.

Make sure you are using the paper support flap. (See Loading paper and other

media on page 14.)

Printed pages re-feed and cause a

paper jam.

Make sure you pull out the paper support until it clicks and unfold the paper

support flap.

Machine does not print from Paint

Brush.

Try setting the Display setting to ‘256 colours’.

Machine does not print from Adobe

Illustrator.

Try to reduce the print resolution. (See Printing for Windows

or Printing and

Faxing for Macintosh

in the Software User's Guide on the CD-ROM.)

The machine cannot print full pages

of a document.

Out of Memory message occurs.

Reduce the printing resolution. (See Printing for Windows

or Printing and Faxing

for Macintosh

in the Software User's Guide on the CD-ROM.)

Reduce the complexity of your document and try again. Reduce the graphic

quality or the number of font sizes within your application software.

Printing (Continued)

Difficulty Suggestions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother DCP-157C Seite 64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother DCP-157C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info