Bedienungsanleitung Brother DCP-167C (Seite 1 von 2) (Englisch)

451166

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

LS6093004

UK/IRE/GEN/SAF

Printed in China

Before you can use the machine, read this Quick Setup Guide

for the correct setup and installation.

Turn the sheet over.

Quick Setup Guide

DCP-145C DCP-163C DCP-165C

DCP-167C DCP-185C

Install the ink cartridges

d. Unpack the ink cartridge.

Turn the green knob on the protective yellow cap clockwise until it clicks to release the vacuum

seal, then remove the cap a.

If all lines are clear and visible, press o a (Yes)

to finish the quality check.

If you can see missing short lines, press o b (No)

and follow the steps on the LCD.

Set the LCD contrast (If needed)

Check the print quality

c. Remove the green protective part a.

Poor

Set the date and time

a. Press Menu.

b. Press a or b to choose

0.Initial Setup, and then press OK.

c. Press a or b to choose

2.LCD Contrast, and then press OK.

d. Press a or b to choose Dark or Light.

e. Press OK and then Stop/Exit.

a. Press Menu.

b. Press a or b to choose

0.Initial Setup, and then press OK.

c. Press a or b to choose

1.Date&Time, and then press OK.

b. Check the quality of the four colour

blocks a on the sheet.

(black/yellow/cyan/magenta)

Unpack the machine and check the components

c. Make sure you have all components.

Inbox Ink

Cartridges [x4]

Black

Yellow

Cyan

Magenta

Power Cord CD-ROM

Quick Setup

Guide

User’s Guide

Approx. 65% yield of the replacement cartridge. For details, see

Consumable items in the User’s Guide.

Plastic bags are used in the packaging of your

machine. To avoid danger of suffocation, please

keep these bags away from babies and children.

WARNING

a. Pull out the paper tray. b. Lift the paper tray cover a.

Load plain A4 paper

c. Press and slide the

paper side guides

a and paper length

guide b to fit the

paper size.

Make sure that the

triangular marks c

on the paper side

guides a and paper

length guide b line

up with the mark for

the paper size you

are using.

d. Fan the stack of paper well.

e. Gently put the paper into

the paper tray. Check that

the paper is flat in the tray.

f. Gently adjust the paper side

guides to the paper with

both hands.

Make sure the paper side

guides touch the edges of

the paper.

g. Close the paper tray cover

and slowly push the paper

tray back into the machine.

h. Pull out the paper support a until

it clicks, and then unfold the paper

support flap b.

Important

Do not push the paper

in too far.

a. Connect the power cord.

The machine must be ﬁ tted with an earthed plug.

WARNING

Connect the power cord

Set the language

a. When the LCD shows this

message, press OK.

Select Language

Press OK Key

Press a or b to choose your

language and press OK.

English e

Select ab & OK

e. Install each ink cartridge in the direction of the arrow on the label.

Take care to match the colour of the lever a with the cartridge

colour b.

Start Here

Illustrations in this Quick Setup Guide are

based on the DCP-145C.

WARNING

Warnings tell you what to do to

prevent possible personal injury.

Important

DO NOT connect

the USB cable yet.

a. The LCD shows:

No Cartridge

Open the ink cartridge cover a.

a. When the preparation process

has finished, the LCD shows this

message.

Set Paper and

Press Start

Press Colour Start.

Note

The components of your box may differ depending on your •

country.

Save all packing materials and the box in case for any •

reason you must ship your machine.

A USB cable is not included. •

You need to purchase a USB 2.0 cable that is no more

than 2 metres long.

a. Remove the protective tape and film.

b. Remove the plastic bag a containing the ink cartridges

from on top of the paper tray.

c. Press a (Yes) to confirm the

language setting.

Note

If you set the wrong language,

you can change it again after

setting the date and time.

(For details see Changing LCD

language in Chapter 3 of the

User’s Guide.)

f. Gently push the ink cartridge until it clicks. After all the ink

cartridges are installed close the ink cartridge cover.

Note

The machine will prepare the ink tube system for printing.

This process will take approximately four minutes.

Do not turn off the machine.

d. Press a or b repeatedly to enter the last two digits of

the year, and then press OK.

Year:2008

(e.g. Enter 08 for 2008.)

e. Repeat for Month and Day, and Hours and Minutes

in 24-hour format.

f. Press Stop/Exit.

Note

If you make a mistake and want to start again,

press Stop/Exit to go back to step a.

Important

DO NOT connect the USB cable

yet.

Note

The control panel warning

LED will stay on until you have

installed the ink cartridges.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother DCP-167C Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother DCP-167C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info