Bedienungsanleitung Brother DCP-387C (Seite 1 von 2) (Englisch)

451181

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Turn the sheet over.

LS6233004

UK/IRE/GEN/SAF

Printed in China

Before you can use the machine, read this Quick Setup Guide

for the correct setup and installation.

Quick Setup Guide

DCP

385C

DCP

383C

DCP

387C

Important

DO NOT

connect the

USB cable yet.

a. After connecting the power

cord, the LCD shows:

Select Language

Select & Press OK

Deutsch

Nederlands

Italiano

Français

English

Press a or b to choose your

language and press OK.

a. The LCD shows:

No Cartridge

Black

Install Ink

b. Open the ink cartridge cover a.

Install the ink cartridges

d. Unpack the ink cartridge.

Turn the green knob on the protective yellow cap clockwise until it clicks to release the vacuum

seal, then remove the cap a.

If all lines are clear and visible, press o

(Yes) to finish the quality check.

If you can see missing short lines, press o

(No) and follow the steps on the LCD.

Connect the power cord

Set the LCD contrast (If needed)

Check the print quality

c. Remove the green protective part a.

a. When the preparation process

has finished, the LCD shows this

message.

Set Paper and Press

Start

Press Colour Start.

Poor

Set the date and time

a. Press Menu.

b. Press a or b to choose

Initial Setup, and then press OK.

c. Press a or b to choose

Date&Time, and then press OK.

Note

If you make a mistake and want to start again,

press Stop/Exit to go back to step a.

Set the language

b. Check the quality of the four colour

blocks a on the sheet.

(black/yellow/cyan/magenta)

b. Choose Yes or No and press

OK.

English

Select Language

Select & Press OK

Yes

a. Press Menu.

b. Press a or b to choose General Setup.

Press OK.

c. Press a or b to choose LCD Settings.

Press OK.

d. Press a or b to choose LCD Contrast.

e. Press d or c to choose Light, Med or Dark.

Press OK.

f. Press Stop/Exit.

Note

You can also adjust the angle of the display by

lifting it.

d. Press a or b repeatedly to enter the last two digits of

the year, and then press OK.

Date&Time

Year:20

MENU Input & Press OK

(e.g. Enter 08 for 2008.)

e. Repeat for Month and Day, and Hours and Minutes

in 24-hour format.

f. Press Stop/Exit.

WARNING

Warnings tell you what to do to

prevent possible personal injury.

d. Make sure you have all components.

Inbox Ink

Cartridges [x4]

Black

Yellow

Cyan

Magenta

Power Cord CD-ROM

Quick Setup

Guide

User’s Guide

Approx. 65% yield of the replacement cartridge. For details, see

Consumable items in the User’s Guide.

Note

The components of your box may differ •

depending on your country.

Save all packing materials and the box in •

case for any reason you must ship your

machine.

A USB cable is not included. •

You need to purchase a USB 2.0 cable

that is no more than 2 metres long.

a. Remove the protective tape and film.

b. Remove the green protective packing a

by lifting the front of the machine and then

pulling down on the packing part.

c. Remove the plastic bag b containing the ink

cartridges from on top of the paper tray.

Plastic bags are used in the packaging of your

machine. To avoid danger of suffocation, please

keep these bags away from babies and children.

WARNING

Unpack the machine and check the components

Start Here

a. Pull out the paper tray.

b. Lift the paper tray cover a.

Load plain A4 paper

c. Press and slide the

paper side guides

a and paper length

guide b to fit the

paper size.

Make sure that the

triangular marks c

on the paper side

guides a and paper

length guide b line

up with the mark for

the paper size you

are using.

Important

Do not push the paper

in too far.

d. Fan the stack of paper well.

e. Gently put the paper into

the paper tray.

Check that the paper is flat

in the tray.

f. Gently adjust the paper side

guides to the paper with

both hands. Make sure the

paper side guides touch the

edges of the paper.

g. Close the paper tray cover

and slowly push the paper

tray back into the machine.

h. Pull out the paper support

a until it clicks, and then unfold

the paper support flap b.

a. Connect the power cord.

The machine must be ﬁ tted with an earthed plug.

WARNING

Important

DO NOT connect the USB cable

yet.

Note

The control panel warning

LED will stay on until you have

installed the ink cartridges.

Note

The languages available may differ depending on your country.•

If you set the wrong language, you can change it again after •

setting the date and time.

(For details see Changing LCD language in Chapter 3 of the User’s Guide.)

e. Install each ink cartridge in the direction of the arrow on the label.

Take care to match the colour of the lever a with the cartridge

colour b.

f. Gently push the ink cartridge until it clicks. After all the

ink cartridges are installed close the ink cartridge cover.

Note

The machine will prepare the ink tube system for printing.

This process will take approximately four minutes.

Do not turn off the machine.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother DCP-387C Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother DCP-387C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info