Bedienungsanleitung Brother DCP-585CW (Seite 27 von 43) (Englisch)

451182

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

For Wireless Network Users

Wireless Network

Connecting the Brother machine to the wireless network

Configure the wireless

settings (Typical

Wireless Setup in

infrastructure mode)

a On your machine, press Menu.

Press a or b to choose Network and press

OK.

Press a or b to choose WLAN and press OK.

Press a or b to choose Setup Wizard and

press OK.

When Network I/F switched to

Wireless is displayed, press OK to accept.

This will start the wireless setup wizard.

To cancel, press Clear/Back.

b The machine will search for available SSIDs. If

a list of SSIDs is displayed, use the a or b keys

to choose the SSID you wrote down in step 11

on page 26, then press OK. Go to f.

If your access point is set to not broadcast the

SSID you will have to manually add the SSID

name. Go to c.

c Press a or b to choose <New SSID> and press

OK. Go to d.

d Enter the SSID you wrote down in step 11 on

page 26 using the a, b keys to choose each

letter or number.

You can use the d and c keys to move the

cursor left and right. For example, to enter the

letter a, press the a key once. To enter the

number 3, hold down the a key until it appears.

The letters appear in this order: lower case,

upper case, numbers and then special letters.

(For more information, see Entering Text for

Wireless Settings on page 42.)

Press OK when you have entered all the

characters.

e Press a or b to choose Infrastructure,

then press OK.

f Use the a, b and OK keys to choose one of the

options below: If your network is configured for

Authentication and Encryption you must match

the settings used for your network.

 No Authentication or Encryption:

Choose Open System, press OK then

choose None for Encryption Type? and

press OK. Then press Yes to apply your

settings. Go to i.

 No Authentication with WEP Encryption:

Choose Open System, press OK then use

the a or b to choose WEP for the

Encryption Type? and press OK.

Go to g.



Authentication with WEP Encryption:

Choose

Shared Key

and press

Go to

 Authentication with WPA/WPA2-PSK

(TKIP or AES) Encryption:

Choose WPA/WPA2-PSK and press OK.

Go to h.

g Press a or b to choose the appropriate key

number and press OK. Enter the WEP key you

wrote down in step 11 on page 26 using the a,

b keys to choose each letter or number.

You can use the d and c keys to move the

cursor left and right. For example, to enter the

letter a, press the a key once. To enter the

number 3, hold down the a key until it appears.

The letters appear in this order: lower case,

upper case, numbers and then special letters.

(For more information, see Entering Text for

Wireless Settings on page 42.)

Press OK when you have entered all the

characters, then press Yes to apply your

settings. Go to i.

Important

You must have the wireless setting you wrote

down for your network in step 11 on page 26

before you proceed.

Note

It will take several seconds to display a list of

available SSIDs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother DCP-585CW Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother DCP-585CW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info