Bedienungsanleitung Brother DCP-7057W (Seite 22 von 35) (Englisch)

585298

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

For Wireless Network Users

Manual configuration from the control panel (Windows

and Macintosh)

Configure the wireless

settings

a (For DCP-7055W / DCP-7057W) On your

machine, press Menu and press a or b to

choose 3.Network, and press OK. Press a or

b to choose 2.Setup Wizard, and press OK.

(For DCP-7070DW) On your machine, press

Menu and press a or b to choose 4.Network,

and press OK. Press a or b to choose 2.WLAN,

and press OK. Press a or b to choose

2.Setup Wizard, and press OK.

When

WLAN Enable ?

is displayed, press

choose

. This will start the wireless setup wizard.

Otherwise press Stop/Exit to exit from the

wireless setup wizard.

b The machine will search for available SSIDs. If

a list of SSIDs is displayed, use the a or b key

to choose the SSID you wrote down in step 9

on page 17, then press OK.

If you are using an authentication and

encryption method that requires a Network

Key, go to c.

If your authentication method is Open System

and your encryption mode is None, go to e.

If your wireless access point/router supports

Wi-Fi Protected Setup,

Selected access

point supports WPS. Use WPS?

appears.

To connect your machine using the automatic

wireless mode, press

to choose

Yes

. (If you

choose

, go to

to enter the Network Key.)

When

Start WPS on your wireless

access point/router,then choose

Next.

appears, press the Wi-Fi Protected Setup

button on your wireless access point/router, and

then press

to choose

. Go to

c Enter the Network Key you wrote down in

step 9 on page 17 using a or b to choose each

letter or number. To delete the letters you have

entered, press Clear.

For example, to enter the letter a, press a or b

until it appears. To enter the next character,

press OK.

For more information, see Entering Text for

Wireless Settings on page 27.

Press OK twice when you have entered all the

characters, then press a or b to choose Yes,

and press OK to apply your settings. Go to d.

d Your machine will now try to connect to your

wireless network using the information you

have entered.

e A connection result message appears on the

LCD and a WLAN report will automatically be

printed.

If the connection failed, check the error code on

the printed report and refer to

Troubleshooting on page 24.

To install the MFL-Pro Suite, continue to

step 11.

For Windows

Users:

Now go to

page 28

For Macintosh Users:

Now go to

page 30

IMPORTANT

You must have the wireless settings you

wrote down for your network in step 9 on

page 17 before you proceed.

Note

• It will take several seconds to display a list of

available SSIDs.

• If a list of SSIDs is not displayed, make sure

your access point is on. Move your machine

closer to the access point and try starting from

a again.

• If your access point is set to not broadcast the

SSID you will have to manually add the SSID

name. For details, see Configuring your

machine when the SSID is not broadcast in the

Network User's Guide.

Wireless setup is now complete.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother DCP-7057W Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother DCP-7057W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info