Bedienungsanleitung Brother DCP-J515W (Seite 55 von 91) (Englisch)

451190

Zoom out

Zoom in

Vorherige Seite

1/91

Nächste Seite

Troubleshooting

White horizontal lines appear in text

or graphics.

Clean the print head. (See Cleaning the print head on page 37.)

Make sure you are using Brother Original Innobella™ ink.

Try using the correct types of paper. (See Acceptable paper and other print media

on page 17.)

If you want to print on Photo 10  15 cm or Photo L 89  127 mm paper, make

sure you use the photo paper tray. (See Loading photo paper on page 12.)

The machine prints blank pages. Clean the print head. (See Cleaning the print head on page 37.)

Characters and lines are stacked. Check the printing alignment. (See Checking the print alignment on page 38.)

Printed text or images are skewed. Make sure the paper is loaded correctly in the paper tray and the paper side

guides are adjusted correctly. (See Loading paper and other print media

on page 8.)

Make sure the Jam Clear Cover is closed correctly.

Smudged stain at the top centre of

the printed page.

Make sure the paper is not too thick or curled. (See Acceptable paper and other

print media on page 17.)

Smudged stain at the right or left

corner of the printed page.

Make sure the paper is not curled when you print on the back side of the paper

with the Print Odd Pages and Print Even Pages settings.

Printing appears dirty or ink seems

to run.

Make sure you are using the recommended types of paper. (See Acceptable

paper and other print media on page 17.) Don't handle the paper until the ink is

dry.

If you are using photo paper, make sure that you have set the correct paper type.

If you are printing a photo from your PC, set the Media Type in the Basic tab of

the printer driver.

Make sure you are using Brother Original Innobella™ ink.

Stains appear on the reverse side

or at the bottom of the page.

Make sure the printer platen is not dirty with ink. (See Cleaning the machine’s

printer platen in appendix A in the Advanced User’s Guide.)

Make sure you are using the paper support flap. (See Loading paper and other

print media on page 8.)

The machine prints dense lines on

the page.

Check Reverse Order in the Basic tab of the printer driver.

The printouts are wrinkled. In the printer driver Advanced tab, click Colour Settings, and uncheck

Bi-Directional Printing.

Make sure you are using Brother Original Innobella™ ink.

Cannot perform “Page Layout”

printing.

Check that the paper size setting in the application and in the printer driver are the

same.

Print speed is too slow. Try changing the printer driver setting. The highest resolution needs longer data

processing, sending and printing time. Try the other quality settings in the printer

driver Advanced tab. Also, click the Colour Settings, and make sure you

uncheck Colour Enhancement

rn the borderless feature off. Borderless printing is slower than normal printing.

(See Printing for Windows

or Printing and Faxing for Macintosh in the Software

User’s Guide.)

Colour Enhancement is not

working correctly.

If the image data is not full colour in your application (such as 256 colour), Colour

Enhancement will not work. Use at least 24 bit colour data with the Colour

Enhancement feature.

Printing (continued)

Difficulty Suggestions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother DCP-J515W Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother DCP-J515W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info