41471
92
Zoom out
Zoom in
Vorherige Seite
1/127
Nächste Seite
82
Transferring your faxes or
Fax Journal report B
If the LCD shows:
Change Unable XX
Clean Unable XX
Init Unable XX
Print Unable XX
Scan Unable XX
Tel Disabled XX
we recommend transferring your faxes to
another fax machine. (See Transferring faxes
to another fax machine on page 83.)
You can also transfer the Fax Journal report
to see if there are any faxes you need to
transfer. (See Transferring Fax Journal report
to another fax machine on page 83.)
Note
If there is an error message on the machine's
LCD, after the faxes have been transferred,
disconnect the machine from the power source
for several minutes, and then reconnect it.
No Response/Busy
The number you dialed does not
answer or is busy.
Verify the number and try again.
Not Registered
You tried to access a One-Touch or
Speed Dial number that is not
programmed.
Set up the One-Touch or Speed Dial number.
(See Storing Speed-Dial numbers on page 45.)
Out of Memory The machine's memory is full. Fax sending or copy operation in progress
Press Stop/Exit and wait until the other
operations in progress finish and then try
again.
Clear the data in the memory. To gain extra
memory, you can turn off Fax Storage.
(See Turning off Remote Fax
Options on page 52.)
Print the faxes that are in the memory. (See
Printing a fax from the memory on page 33.)
Paper Jam Paper is jammed in the machine. Open the Upper and Lower Jam Clear Covers
(at back of machine) and remove the jammed
paper. (See Printer jam or paper
jam on page 84.)
Print Unable XX
Scan Unable XX
Tel Disabled XX
(FAX-1560 only)
The machine has a mechanical
problem.
—OR
A foreign objects such as a clip or
ripped paper is in the machine.
Open the Upper Jam Clear Cover and remove
any foreign objects inside the machine.
(FAX-1355 and FAX-1360) If the error message
continues, see Transferring your faxes or Fax
Journal report on page 82 before disconnecting
the machine so you will not lose any important
messages. Then, disconnect the machine from
the power for several minutes and then
reconnect it.
(FAX-1460 and FAX-1560) Disconnect the
machine from the power for several minutes,
then reconnect it. (The machine can be turned
off for up to 24 hours without losing faxes stored
in the memory.)
Wrong Paper Size
Paper is not the correct size. Load the correct size of paper (Letter, Legal or
A4), and then press Start.
Error Message Cause Action
92

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

brother-fax-1360

Suche zurücksetzen

  • Ich habe ein Fax mit dem Gerät Brother 1360 verschickt beim Empfänger kommt es in Endlosschleife an und läßt sich weder bei mir als Absender noch beim Empfänger ausstellen, wie geht das ? Eingereicht am 30-7-2018 12:23

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother FAX-1360 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother FAX-1360

Brother FAX-1360 Bedienungsanleitung - Deutsch - 135 seiten

Brother FAX-1360 Bedienungsanleitung - Holländisch - 135 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info