4937
47
Zoom out
Zoom in
Vorherige Seite
1/123
Nächste Seite
CHAPTER 2 OPTIONS
2-5
How to set the Serial Interface Parameters
Note
This section is only for printer models which have had the serial interface installed.
!
Caution
Be sure to set the parameters to match your computer as follows:
Never change the RS-422A parameters for Apple Macintosh computers. The
RS-422A parameters have been correctly set at the factory for Apple Macintosh
computers, you do not need to change the settings. You may skip this section. If
you change parameters for the RS-232C serial interface and you switch back to
RS-422A for Apple Macintosh computers, be sure to restore the parameters to
the factory settings.
Set the RS-232C parameters to match your computer. You can change the serial
settings for your PC in several different places; within your DOS application,
within the Windows Printer Icon (for Windows application software only) or
within your AUTOEXEC.BAT file using MODE commands. For information on
serial interface parameters, see the user’s guide of your computer or software.
Do not alter the dual in - line package (DIP) switch settings when the printer
power is on.
If necessary, set the serial interface parameters as follow:
1
.
Make sure that the printer is in the off-line state.
2
.
Set the serial interface parameters you require by referring to Table 1 below and by
moving up (on) or down (off) the selectors of the dual in-line package (DIP) switch.
The default settings for both RS-422A and RS-232C modes are all switches set to
OFF (down).
ON
12345678
Fig. 2-3 Setting the Serial Interface Parameters
47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother HL-1240 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother HL-1240

Brother HL-1240 Installationsanweisung - Deutsch - 16 seiten

Brother HL-1240 Bedienungsanleitung - Deutsch - 123 seiten

Brother HL-1240 Installationsanweisung - Englisch - 16 seiten

Brother HL-1240 Installationsanweisung - Holländisch - 16 seiten

Brother HL-1240 Bedienungsanleitung - Holländisch - 122 seiten

Brother HL-1240 Bedienungsanleitung - Französisch - 125 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info