Bedienungsanleitung Brother HL-2070N (Seite 5 von 30) (Englisch)

1869

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

FDA Regulations (100 to 120 volt Model Only)

U.S. Food and Drug Administration (FDA) has implemented regulations for

laser products manufactured on and after August 2, 1976. Compliance is

mandatory for products marketed in the United States. One of the following

labels on the back of the printer indicates compliance with the FDA

regulations and must be attached to laser products marketed in the United

States.

☛ Caution: Use of controls, adjustments or performance of

procedures other than those specified in this manual may

result in hazardous radiation exposure.

IEC 60825-1 specification (220 to 240 volt model only)

This printer is a Class 1 laser product as defined in IEC 60825-1

specifications. The label shown below is attached in countries where it is

needed.

This printer has a Class 3B laser diode which produces invisible laser

radiation in the scanner unit. You should not open the scanner unit under any

circumstances.

☛ Caution: Use of controls or adjustments or performance of

procedures other than those specified herein may result in

hazardous radiation exposure.

For Finland and Sweden

LUOKAN 1 LASERLAITE

KLASS 1 LASER APPARAT

☛ Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa

mainitulla tavalla saattaa altistaa käyttäjän

turvallisuusluokan 1 ylittävälle näkymättömälle

lasersäteilylle.

☛ Varning Om apparaten används på annat sätt än i denna

Bruksanvisning specificerats, kan användaren utsättas för

osynlig laserstrålning, som överskrider gränsen för

laserklass 1.

Internal laser radiation

Maximum radiation power: 5 mW

Wave length: 770 - 810 nm

Laser class: Class 3B

IMPORTANT - For Your Safety

To ensure safe operation the supplied three-pin plug must be inserted only

into a standard three-pin power outlet that is properly grounded through the

normal household wiring.

Extension cords used with this printer must be three-pin plug type and

correctly wired to provide proper grounding. Incorrectly wired extension

cords may cause personal injury and equipment damage.

The fact that the equipment operates satisfactorily does not imply that the

power is grounded and that the installation is completely safe. For your

safety, if in any doubt about the effective grounding of the power, call a

qualified electrician.

Disconnect device

You must install this printer near a power outlet that is easily accessible. In

case of an emergency, you must disconnect the power cord from the power

outlet to shut off the power completely.

Caution for LAN connection (For model HL-2070N only)

Connect this product to a LAN connection that is not subjected to over

voltages.

IT power system (For Norway only)

This product is also designed for an IT power system with phase-to-phase

voltage 230V.

Wiring information (for UK)

Important

If you need to replace the plug fuse, fit a fuse that is approved by ASTA to

BS1362 with the same rating as the original fuse.

Always replace the fuse cover. Never use a plug that does not have a cover.

Warning - This printer must be earthed.

The wires in the mains lead are coloured in line with the following code:

Green and Yellow: Earth

Blue: Neutral

Brown: Live

If in any doubt, call a qualified electrician.

MANUFACTURED:

Brother Industries, Ltd.,

15-1 Naeshiro-cho Mizuho-ku Nagoya, 467-8561 Japan

This product complies with FDA performance standards for laser

products except for deviations pursuant to Laser Notice No.50, dated

July 26, 2001.

MANUFACTURED:

Brother Corporation (Asia) Ltd. Brother Buji Nan Ling Factory

Gold Garden Ind., Nan Ling Village, Buji, Rong Gang, Shenzhen, CHINA

This product complies with FDA performance standards for laser

products except for deviations pursuant to Laser Notice No.50, dated

July 26, 2001.

CLASS 1 LASER PRODUCT

APPAREIL À LASER DE CLASSE 1

LASER KLASSE 1 PRODUKT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother HL-2070N Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother HL-2070N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info