Bedienungsanleitung Brother HL-3150CDW (Seite 22 von 34) (Englisch)

579712

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

For Wireless Network Users

Manual setup from the control panel using the Setup Wizard

(Windows

, Macintosh and mobile devices)

Set up the wireless

settings

a If you began the wireless setup from step 5 on

page 6 (for mobile devices), go to c.

All other users, go to b.

b On your machine, press a or b to choose

Network and press OK.

Press a or b to choose WLAN and press OK.

c Press a or b to choose Setup Wizard and

press OK.

When WLAN Enable? is displayed, press a to

accept. This will start the wireless setup wizard.

To cancel the wireless setup wizard and exit,

press Cancel.

d The machine will search for available SSIDs. It

will take a few minutes to display a list of

available SSIDs.

If a list of SSIDs is displayed, use the a or b key

to choose the SSID you wrote down in step

10-b on page 19, then press OK.

e Do one of the following:

 If the wireless access point/router of the

selected SSID supports WPS and

WPS is available appears, press a and

go to f.

 If you are using an authentication and

encryption method that requires a Network

Key, go to g.

 If your authentication method is Open

System and your encryption mode is None,

go to h.

f To connect your machine using the automatic

wireless mode, press a to choose Yes. (If you

choose No , go to g to enter the Network Key.)

When Press WPS on rtr appears, press

the WPS button on your wireless access

point/router, and then press a twice. Go to h.

g Enter the Network Key you wrote down in step

10-b on page 19.

To enter a character or number, hold down or

repeatedly press the a or b key until the

character you want appears, and then press

OK.

To delete the characters you have entered,

press the Back key.

For more information, see Entering Text for

Wireless Settings on page 27.

Press OK when you have entered all the

characters, and then press a for Yes to apply

your settings.

h Your machine will now try to connect to your

wireless network using the information you

have entered.

A connection result message appears on the

LCD and a WLAN report will automatically be

printed.

If the connection failed, check the error code on

the printed report and refer to

Troubleshooting on page 25.

Press OK.

IMPORTANT

You must have the wireless settings you wrote

down for your network in step 10-b on page 19

before you proceed.

NOTE

If you use your machine in an IEEE 802.1x

supported wireless network, see Network User's

Guide: Using IEEE 802.1x authentication.

NOTE

• If the list is blank, check that the wireless access

point/router has power and is broadcasting the

SSID. Move your machine closer to the wireless

access point/router and try starting from b

again.

• If your wireless access point/router is set to not

broadcast the SSID you will have to manually

add the SSID name. For details, see Network

User's Guide: Configuring your machine when

the SSID is not broadcast.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother HL-3150CDW Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother HL-3150CDW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info