Bedienungsanleitung Brother HL-5340D (Seite 127 von 172) (Englisch)

509687

127

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

Troubleshooting

117

No Paper

No Paper for Manual

Feed

No Paper MP or Size

Mismatch

No Paper in Tray 1 or

Size Mismatch

No Paper in Tray 2 or

Size Mismatch

No Paper in Tray 3 or

Size Mismatch

 The paper tray may be out of paper or not properly installed. If it is empty, put a new stack

of paper in the paper tray and then press Go. If the problem is still unsolved, the paper

pick-up roller may be stained. Clean the paper pick-up roller. See Cleaning the paper

pick-up roller on page 111.

 If there is paper in the paper tray, make sure it is straight. If the paper is curled, straighten

it before printing. Sometimes it is helpful to remove the paper, turn the stack over and

put it back in the paper tray.

 Cut the amount of paper in the paper tray, and then try again.

 Make sure you use paper that meets Brother’s recommended paper specifications. See

About paper on page 6.

 Load the same size paper that you selected in the current driver setting.

Print Overrun  Press Go to print the remaining data in the printer memory. Cancel the print job if you

want to delete the remaining data in the printer memory. See Control panel buttons on

page 84.

 If this does not clear the error, reduce the complexity of your document or cut the print

resolution.

 Add more memory. See Installing extra memory on page 91.

 Change the following settings in the supplied Windows

driver and try again. The best

combination of these settings will vary depending on your document:

 Graphics mode

 TrueType mode

 Use Printer TrueType

Fonts

Choose the Advanced tab, click the Print Quality icon, and then choose Manual in Print Settings and

click the Setting... button.

Service call error  Check the LED indication to identify the error. See Service call indications on page 82.

Storage Full The RAMDISK size is set to 0 MB. Increase the RAMDISK size. Or there is no space to store

jobs. Delete unnecessary macros or fonts.

Replace PF KitMP Call your dealer or Brother Customer Service for a replacement paper feeding kit (paper

pick up roller and separation plate) for the MP tray.

Replace PF Kit1 Call your dealer or Brother Customer Service for a replacement paper feeding kit (paper

pick up roller and separation plate) for Tray 1.

Replace PF Kit2 Call your dealer or Brother Customer Service for a replacement paper feeding kit (paper

pick up roller and separation plate) for Tray 2.

Replace PF Kit3 Call your dealer or Brother Customer Service for a replacement paper feeding kit (paper

pick up roller and separation plate) for Tray 3.

Replace Fuser Unit Call your dealer or Brother Customer Service for a replacement fuser unit.

Replace Laser Unit Call your dealer or Brother Customer Service for a replacement laser unit.

Replace Toner  See Replacing the toner cartridge on page 95.

Toner Low  Buy a new toner cartridge and have it ready for when the Replace Toner status is

indicated.

Error message Action

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother HL-5340D Seite 127

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother HL-5340D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info