1891
155
Zoom out
Zoom in
Vorherige Seite
1/179
Nächste Seite
6 - 23 TROUBLESHOOTING
Other problems
Printing from DOS
BR-Script 3
Caution
If you do not follow the instructions for using the printer, you may be responsible for all repairs.
Problem Recommendation
The printer cannot print at all.
Your PC shows the following
error message:
'There was an error writing to
LPT1: (or BRUSB) for the
printer.'
Check that the printer cable is not damaged or broken.
If you have an interface-switching device, make sure that you choose the
correct printer.
Problem Recommendation
Cannot print from application
software
Check that the DOS application software interface settings match those of
your printer. For example, if you are using a parallel printer cable, you
would most likely set your DOS software printer port to LPT1.
Check if the printer has any printer alarms.
Check that you have chosen the appropriate printer in your application
software.
Problem Recommendation
The printer cannot print. If IGNORE DATA appears on the LCD, please do the following:
1. Reset the printer: Press the - button twice, then press Set twice and then
press Go.
2. Turn off ERROR PRINT in BR-Script3 mode: Press the + button five
times, then press Set and then press the - button twice, now press Set
twice, select ERROR PRINT = OFF and press Set and then press Go.
3. If the printer prints out the error message page which says "ERROR
NAME; limitcheck", add more memory. See Installing additional memory
on page 4-12.
The print speed slows down. Add optional memory. See Installing additional memory on page 4-12.
The printer cannot print EPS
data.
You need the following settings to print EPS data:
1. In the Printer folder, select the printer you use.
2. Press the Advanced button on the PostScript
®
tab.
3. Select 'Tagged binary communication protocol' in data format.
155

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother HL-6050D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother HL-6050D

Brother HL-6050D Bedienungsanleitung - Deutsch - 175 seiten

Brother HL-6050D Bedienungsanleitung - Holländisch - 183 seiten

Brother HL-6050D Bedienungsanleitung - Französisch - 180 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info