Bedienungsanleitung Brother HL-L2352DW (Seite 172 von 248) (Englisch)

681740

172

Zoom out

Zoom in

Vorherige Seite

1/248

Nächste Seite

Difficulties Suggestions

The machine is not printing or has stopped printing. Cancel the print job and clear it from the machine's

memory. The printout may be incomplete. Send the print

data again.

See Related Information:Cancel a Print Job.

The headers or footers appear when the document

displays on the screen but they do not show up when it is

printed.

There is an unprintable area on the top and bottom of the

page. Adjust the top and bottom margins in your

document to allow for this.

The machine prints unexpectedly or it prints garbage. Cancel the print job and clear it from the machine's

memory. The printout may be incomplete. Send the print

data again.

See Related Information:Cancel a Print Job.

Check the settings in your application to make sure they

are set up to work with your machine.

Confirm that the Brother printer driver is selected in your

application's Print window.

The machine prints the first couple of pages correctly,

then some pages have missing text.

Check the settings in your application to make sure they

are set up to work with your machine.

Your machine is not receiving all of the data sent from the

computer. Make sure you connected the interface cable

correctly.

The machine does not print on both sides of the paper

even though the printer driver setting is 2-sided and the

machine supports automatic 2-sided printing.

Check the paper size setting in the printer driver. You

must select A4 paper that is 60 to 105 g/m

Print speed is too slow. Try changing the printer driver setting. The highest

resolution needs longer data processing, sending and

printing time.

If you have enabled the Quiet Mode, disable the Quiet

Mode on the printer driver or the machine's menu setting.

The machine does not feed paper. If there is paper in the paper tray, make sure it is straight.

If the paper is curled, straighten it. Sometimes it is helpful

to remove the paper, turn the stack over and place it back

in the paper tray.

Reduce the amount of paper in the paper tray, and then

try again.

(For models with Manual Feed Slot)Make sure Manual is

not selected for Paper Source in the printer driver.

Clean the paper pick-up rollers.

The machine does not feed paper from the Manual feed

slot.

(For models with Manual Feed Slot)

Use both hands to push one sheet of paper firmly into the

manual feed slot until the top edge of the paper presses

against the paper feed rollers. Continue pressing the

paper against the rollers until the machine grabs the

paper and pulls it in further.

Put only one sheet of paper in the manual feed slot.

Make sure Manual is selected as Paper Source in the

printer driver.

The machine does not feed envelopes. (For models with Manual Feed Slot)Load one envelope at

a time in the manual feed slot. Your application must be

set to print the envelope size you are using. This is

usually done in the Page Setup or Document Setup menu

of your application.

Related Information

• Troubleshooting

168

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother HL-L2352DW Seite 172

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother HL-L2352DW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info