Bedienungsanleitung Brother HL-L2372DN (Seite 182 von 248) (Englisch)

681739

182

Zoom out

Zoom in

Vorherige Seite

1/248

Nächste Seite

Home > Troubleshooting > Network Problems > I Cannot Complete the Wireless Network Setup

Configuration

I Cannot Complete the Wireless Network Setup Configuration

Related Models: HL-L2350DW/HL-L2357DW/HL-L2375DW

Turn your wireless router off and back on. Then try to configure the wireless settings again. If you are unable to

resolve the problem, follow the instructions below:

Investigate the problem using the WLAN Report.

Cause

Action Interface

Your security settings (SSID/

Network Key) are not

correct.

• Confirm the security settings using the Wireless Setup Helper

utility. For more information and to download the utility, go to your

model's Downloads page on the Brother Solutions Center at

support.brother.com.

• Select and confirm that you are using the correct security

settings.

- See the instructions supplied with your wireless LAN access

point/router for information on how to find the security

settings.

- The manufacturer's name or model number of the wireless

LAN access point/router may be used as the default security

settings.

- Consult with the access point/router manufacturer, your

Internet provider, or network administrator.

Wireless

Your Brother machine's MAC

address is not allowed.

Confirm that the Brother machine's MAC Address is allowed in the

filter. You can find the MAC Address on your Brother machine's

control panel.

Wireless

Your wireless LAN access

point/router is in stealth

mode (not broadcasting the

SSID).

• Enter the correct SSID name or Network Key manually.

• Check the SSID name or the Network Key in the instructions

supplied with your wireless LAN access point/router and

reconfigure the wireless network setup.

Wireless

Your security settings (SSID/

password) are not correct.

• Confirm the SSID and password.

- When you are configuring the network manually, the SSID

and password are displayed on your Brother machine. If your

mobile device supports the manual configuration, the SSID

and password will be displayed on your mobile device’s

screen.

Wi-Fi Direct

You are using Android

™

4.0.

If your mobile device disconnects (approximately six minutes after

using Wi-Fi Direct), try the one-push configuration using WPS

(recommended) and set the Brother machine as a G/O.

Wi-Fi Direct

Your Brother machine is

placed too far from your

mobile device.

Move your Brother machine within about 3.3 feet (1 metre) of the

mobile device when you configure the Wi-Fi Direct network settings.

Wi-Fi Direct

There are some obstructions

(walls or furniture, for

example) between your

machine and the mobile

device.

Move your Brother machine to an obstruction-free area. Wi-Fi Direct

There is a wireless

computer, Bluetooth

supported device,

microwave oven, or digital

cordless phone near the

Brother machine or the

mobile device.

Move other devices away from the Brother machine or the mobile

device.

Wi-Fi Direct

178

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother HL-L2372DN Seite 182

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother HL-L2372DN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info