585296
148
Zoom out
Zoom in
Vorherige Seite
1/160
Nächste Seite
Troubleshooting
142
6
1
Printer properties for Windows
®
7 and Windows Server
®
2008 R2 users
Other difficulties
Difficulties Suggestions
The machine will not turn on. Adverse conditions on the power connection (such as lightning or a power surge)
may have triggered the machine’s internal safety mechanisms. Turn the machine off
and unplug the power cord. Then plug in the power cord.
If the problem is not solved, turn off the machine. If you are using a power breaker,
disconnect it to make sure it is not the problem. Plug the machine’s power cord
directly into a different known working electrical socket. If there is still no power, try
a different power cable.
The machine cannot print EPS
data that includes binary with
the BR-Script3 printer driver.
(Windows
®
)
You need the following settings to print EPS data:
a For Windows
®
7 and Windows Server
®
2008 R2:
Click the button and Devices and Printers.
For Windows Vista
®
and Windows Server
®
2008:
Click the button, Control Panel, Hardware and Sound, and then
Printers.
For Windows
®
XP and Windows Server
®
2003:
Click the Start button, and select Printers and Faxes.
b Right-click the Brother HL-S7000DN BR-Script3 icon and select Properties
1
.
Click Brother HL-S7000DN BR-Script3 if necessary.
c From the Device Settings tab, choose TBCP (Tagged binary communication
protocol) in Output Protocol.
(Macintosh)
If your machine is connected to a computer with a USB interface, you cannot print
EPS data that includes binary. You can print the EPS data if the machine is
connected to a network. For installing the BR-Script3 printer driver through the
network, visit the Brother Solutions Center at http://solutions.brother.com/
.
The ink cartridge runs out
soon after replacing it, and a
message is displayed
prompting you to replace the
ink cartridge.
Make sure you are using Brother Original Ink.
Cannot open the machine’s
top cover.
The machine’s top cover may be locked if you disconnect the power cord during
printing. To unlock the cover, connect the power cord to the electrical socket, and
wait for the machine to enter standby mode.
The machine continues to
operate after printing.
When printing has finished, the machine will operate for a short time to keep the print
head from drying out and to maintain print quality. You can print even if the machine
is in this maintenance mode.
148

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

brother-hl-s7000dn

Suche zurücksetzen

  • Abfalltank beim HL-S7000DN ausgetauscht, trotzdem kommt Fehlermeldung Abfalltank ist voll. Was tun? Eingereicht am 29-12-2019 10:48

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother HL-S7000DN wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother HL-S7000DN

Brother HL-S7000DN Installationsanweisung - Deutsch - 35 seiten

Brother HL-S7000DN Bedienungsanleitung - Deutsch - 165 seiten

Brother HL-S7000DN Installationsanweisung - Englisch - 35 seiten

Brother HL-S7000DN Bedienungsanleitung - Holländisch - 164 seiten

Brother HL-S7000DN Installationsanweisung - Holländisch - 35 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info