Bedienungsanleitung Brother Innov-is 1250D (Seite 180 von 212) (Englisch)

613419

180

Zoom out

Zoom in

Vorherige Seite

1/212

Nächste Seite

178

EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Using the Memory Function

Embroidery data precautions

Observe the following precautions when using embroidery data other than that created and saved in this machine.

CAUTION

■ Types of Embroidery Data That Can Be Used

• Only .pes and .dst embroidery data files can be used with this machine. Using data other than that saved

using our data design systems or sewing machines may cause the embroidery machine to malfunction.

■ Types of USB Media That Can Be Used

Embroidery data can be recalled from a USB flash drive (USB flash memory) of any size.

Note

z Only a USB flash drive (USB flash memory) can be connected to the USB port on this machine.

z Some USB media may not be compatible with this machine. Visit our website for more details.

z When using USB media equipped with an access indicator, the access indicator will begin flashing

after the media is inserted into your computer or machine, and may take about 5 to 6 seconds before

the media is recognized. (The length of time differs depending on the USB media.)

z For additional information, refer to the instruction manual included with the USB media that you have

purchased.

Memo

z Letters and numerals can be used in file names. In addition, if the file name contains no more than

eight characters, the entire file name will appear on the screen. If the file name is more than eight

characters long, only the first six characters followed by “~” and a number appear as the file name.

This applies to .dst embroidery data files only.

z Only the names of .dst files are displayed.

■ Precautions on Using the Computer To Create and Save Data

• If the file name of embroidery data cannot be identified, for example, because the name contains special

characters, the file will not be displayed. If this occurs, change the name of the file. We recommend using

the 26 letters of the alphabet (uppercase and lowercase), the numbers 0 through 9, “-”, and “_”.

• All designs must be within the 18 cm (H) × 13 cm (W) (Approx. 7 inches (H) × 5 inches (W)) design field

size. If the selected pattern does not fit within the 18 cm (H) × 13 cm (W) (Approx. 7 inches (H) × 5 inches

(W)) design field size unless it is rotated 90 degrees, a message appears, asking if you wish to rotate the

pattern 90 degrees.

• .pes files saved with the number of stitches, the number of colors and the number of combined patterns

exceeding the specified limits cannot be displayed. Use one of our original data design systems to edit the

embroidery pattern so that it meets the required specifications.

• Even if the embroidery unit is not attached, the machine will recognize embroidery data.

• Save the patterns in the root directory of the USB media. If embroidery data is saved in a folder on USB

media, that embroidery data cannot be retrieved by the machine.

● When using embroidery data other than our original patterns, the thread or needle may break

when sewing with a stitch density that is too fine or when sewing three or more overlapping

stitches. In that case, use one of our original data design systems to edit the embroidery data.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother Innov-is 1250D Seite 180

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother Innov-is 1250D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info