Bedienungsanleitung Brother Innov-is 410 (Seite 149 von 168) (Englisch)

613440

149

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

Troubleshooting 147

—

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

—

Incorrect thread tension

■ Symptoms

• Symptom 1: The lower thread is visible from the upper side of the fabric.

• Symptom 2: The upper thread appears as a straight line on the upper side of the fabric.

• Symptom 3: The upper thread is visible from the lower side of the fabric.

• Symptom 4: The lower thread appears as a straight line on the lower side of the fabric.

• Symptom 5: The stitching on the lower side of the fabric is loose or has slack.

■ Cause/remedy/check details

❏ Cause 1

The machine is not correctly threaded.

The lower threading is incorrect.

Return the thread tension dial to “4”, and then

refer to “

Upper thread tightened up

” (page 144)

to correct the threading.

The upper threading is incorrect.

Return the thread tension dial to “4”, and then

refer to “Tangled thread on wrong side of

fabric” (page 145) to correct the upper

threading.

❏ Cause 2

A needle and thread appropriate for the fabric

are not being used.

The sewing machine needle that should be

used depends on the type of fabric sewn and

the thread thickness.

If a needle and thread appropriate for the fabric

are not being used, the thread tension will not

be adjusted correctly, causing wrinkles in the

fabric or skipped stitches.

• Refer to “Needle types and their uses” (page

38) to check that a needle and thread

appropriate for the fabric are being used.

❏ Cause 3

An appropriate setting on the thread tension

dial is not selected.

Turn the thread tension dial to select an

appropriate thread tension.

The appropriate thread tension differs according

to the type of fabric and thread being used.

* Adjust the thread tension while test sewing

on a piece of scrap fabric that is the same as

that used in your project.

Note

z If the upper threading and lower threading

are incorrect, the thread tension cannot be

adjusted correctly, even by turning the

thread tension dial. Check the upper

threading and lower threading first, and then

adjust the thread tension.

• When the lower thread is visible from the

upper side of the fabric. Turn the thread

tension dial to a lower number (toward the

left). (Loosen the thread tension.)

• When the upper thread is visible from the

lower side of the fabric. Turn the thread

tension dial to a higher number (toward the

right). (Tighten the thread tension.)

❏ Symptom 1 ❏ Symptom 3

a Lower side of fabric

b Lower thread visible from

upper side of fabric

c Upper thread

d Upper side of fabric

e Lower thread

f Upper thread visible from

lower side of fabric

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother Innov-is 410 Seite 149

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother Innov-is 410

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info