Bedienungsanleitung Brother Innov-is 5000 (Seite 13 von 252) (Englisch)

613627

Zoom out

Zoom in

Vorherige Seite

1/252

Nächste Seite

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

The names of the various parts of the sewing machine and their functions are described below. Before

using the sewing machine, carefully read these descriptions to learn the names of the machine parts.

Machine

■ Front View

a Top cover

Open the top cover to thread the machine and wind the bobbin.

b Thread cutter

Pass the threads through the thread cutter to cut them.

c Thread take-up lever check window

Look through the window to check the upper thread passing

through in it.

d Flat bed attachment with accessory compartment

Store presser feet and bobbins in the accessory compartment

of the flat bed attachment. When sewing cylindrical pieces,

remove the flat bed attachment.

e Operation buttons (6 buttons) and sewing speed

controller

Use these buttons and the slide to operate the sewing machine.

f Knee lifter slot

Insert the knee lifter into the slot.

g Knee lifter

Use the knee lifter to raise and lower the presser foot.

h LCD (liquid crystal display)

Settings for the selected stitch and error messages appear in

the LCD.

i Thread guide plate

Pass the thread around the thread guide plate when threading

upper thread.

j Spool cap

Use the spool cap to hold the spool in place.

k Spool pin

Place a spool of thread on the spool pin.

l Bobbin winder

Use the bobbin winder when winding the bobbin.

m Supplemental spool pin

Use this spool pin to wind the bobbin thread, or to sew with the

twin needle.

n Thread guide for bobbin winding

Pass the thread around this thread guide when winding the

bobbin thread.

o Pretension disk

Pass the thread around the pretension disk when winding the

bobbin thread.

■ Right-side/Rear View

a Handle

Carry the sewing machine by its handle when transporting the

machine.

b Handwheel

Turn the handwheel toward you to raise and lower the needle.

The wheel should be turned toward the front of the machine.

c Embroidery card slot

Insert the embroidery cards (sold separately) into the

embroidery card slot.

d USB port connector for media

In order to send patterns from/to USB media, plug the USB

media directly into the USB port connector.

e USB port connector for computer

In order to import/export patterns between a computer and the

machine, plug the USB cable into the USB port connector.

f Touch pen holder

Use the touch pen holder to hold the touch pen when not in use.

g Main power switch

Use the main power switch to turn the sewing machine ON and

OFF.

h Jack connector

Insert the power cord into the connector jack.

i Feed dog position switch

Use the feed dog position switch to lower the feed dogs.

j Presser foot lever

Raise and lower the presser foot lever to raise and lower the

presser foot.

k Air vent

The air vent allows the air surrounding the motor to circulate. Do

not cover the air vent while the sewing machine is being used.

l Foot controller with retractable cord

Depress the foot controller to control the speed of the machine.

m Foot controller jack

Insert the foot controller plug into its jack on the machine.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother Innov-is 5000 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother Innov-is 5000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info