Bedienungsanleitung Brother Innov-is 900 (Seite 138 von 192) (Englisch)

463626

138

Zoom out

Zoom in

Vorherige Seite

1/192

Nächste Seite

136

EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Embroidering Neatly

This section describes the preparations and basic procedures for embroidering.

What to prepare

The following is necessary for embroidering.

■ Fabric

Prepare the fabric for embroidery. Prepare a piece

of fabric a little larger than the embroidery frame

that matches the size of the pattern you want to

sew.

Note

z Always use stabilizer when sewing

embroidery projects, especially when

embroidering on lightweight or stretch

fabrics.

z When embroidering on large pieces of

fabric, arrange the fabric so that it does not

hang off the table where the sewing machine

is placed. If embroidery is done with the

fabric hanging off, the embroidery unit

movement may be impaired, this could

cause the pattern to sew incorrectly.

CAUTION

■ Stabilizer material (option)

Attach a stabilizer material for embroidery to the

fabric to prevent poor quality embroidery designs.

Use a water soluble sheet on thin materials like

organdy and fabrics with a nap like towels.

For details, refer to

"Attaching a stabilizer material

to the fabric"

(

page 144

■ Embroidery thread (option)

For the upper thread, use the embroidery thread or

country thread.

For the bobbin thread, use the embroidery bobbin

thread. For details, refer to "Optional accessories"

(page 10).

Memo

z For good quality embroidery designs be sure

to use embroidery thread designed for

embroidery machines.

z Before starting to sew, be sure there is

enough bobbin thread. If you continue

embroidering when the bobbin thread is

low, the thread may become tangled.

■ Needle

Use a 75/11 home sewing machine needle. When

embroidering on thick fabrics such as denim, use a

90/14 home sewing machine needle.

Memo

z A 75/11 needle is already installed when the

sewing machine is purchased.

z When replacing the needle, refer to

"Replacing the needle" (page 41).

CAUTION

■ Other

Embroidery frames "small" and "large" are

optional. For details, refer to "Setting the fabric in

the embroidery frame" (page 145).

● Do not embroider fabrics that are too

thick. To check the fabric thickness,

attach the embroidery frame to the

embroidery unit, and use (Needle

position button) to raise the needle. If

there is space between the presser foot

and the fabric, the fabric can be

embroidered. If there is not space, do not

embroider the fabric. Otherwise, the

needle may break, resulting in injury.

● Be careful when sewing overlapping

patterns. The needle may not easily pierce

the fabric, causing the needle to break.

● Since ball point needles (gold colored) are

needles for fabrics where stitches are

easily skipped, such as pattern stitching

and stretch fabrics, be absolutely sure not

to use them for embroidery. The needle

may break or bend.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother Innov-is 900 Seite 138

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother Innov-is 900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info