Bedienungsanleitung Brother Innov-is 950 (Seite 184 von 204) (Englisch)

613563

184

Zoom out

Zoom in

Vorherige Seite

1/204

Nächste Seite

182

APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Incorrect thread tension

■ Symptoms

• Symptom 1: The lower thread is visible from the upper side of the fabric.

• Symptom 2: The upper thread appears as a straight line on the upper side of the fabric.

• Symptom 3: The upper thread is visible from the lower side of the fabric.

• Symptom 4: The lower thread appears as a straight line on the lower side of the fabric.

• Symptom 5: The stitching on the lower side of the fabric is loose or has slack.

■ Cause/remedy/check details

 Cause 1

The machine is not correctly threaded.

The bobbin threading is incorrect.

Return the upper thread tension to the standard

setting, and then refer to "Upper thread tightened

up" (page 178) to correct the threading.

The upper threading is incorrect.

Return the upper thread tension to the standard

setting, and then refer to "Tangled thread on

wrong side of fabric" (page 179) to correct the

upper threading.

 Cause 2

A needle and thread appropriate for the fabric

are not being used.

The sewing machine needle that should be used

depends on the type of fabric sewn and the thread

thickness.

If a needle and thread appropriate for the fabric

are not being used, the thread tension will not be

adjusted correctly, causing wrinkles in the fabric

or skipped stitches.

• Refer to "Selecting the needle depending on

the thread and fabric types" (page 39) to

check that a needle and thread appropriate

for the fabric are being used.

 Cause 3

The setting selected for the upper thread tension

is not appropriate.

Refer to "Adjusting the stitch length" (page 62) to

select an appropriate thread tension.

The appropriate thread tension differs depending

on the type of fabric and thread being used.

* Adjust the thread tension while test sewing

on a piece of scrap fabric that is the same as

that used in your project.

Note

z If the upper threading and bobbin threading

are incorrect, the thread tension cannot be

adjusted correctly. Check the upper

threading and bobbin threading first, and

then adjust the thread tension.

If the bobbin thread is visible from the right

side of the fabric

Turn the thread tension dial to the left to

loosen the upper thread.

If the upper thread is visible from the wrong

side of the fabric

Turn the thread tension dial to the right to

tighten the upper thread.

 Symptom 1  Symptom 3

a Lower side of fabric

b Lower thread visible from

upper side of fabric

c Upper thread

d Upper side of fabric

e Lower thread

f Upper thread visible from

lower side of fabric

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother Innov-is 950 Seite 184

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother Innov-is 950

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info