Bedienungsanleitung Brother Innov-is Ie (Seite 15 von 376) (Englisch)

613638

Zoom out

Zoom in

Vorherige Seite

1/376

Nächste Seite

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

The names of the various parts of the sewing machine and their functions are described below. Before

using the sewing machine, carefully read these descriptions to learn the names of the machine parts.

Machine

■ Front View

a Top cover

Open the top cover to thread the machine and wind the bobbin.

b Pre-tension disk

Pass the thread around the pre-tension disk when winding the

bobbin thread. (page 48)

c Thread guide for bobbin winding

Pass the thread through this thread guide when winding the

bobbin thread. (page 48)

d Spool pin

Place a spool of thread on the spool pin. (page 57)

e Spool cap

Use the spool cap to hold the spool of thread in place. (page 57)

f Supplemental spool pin

Use this spool pin to wind the bobbin thread, or to sew with the

twin needle. (page 48, 60)

g Bobbin winder

Use the bobbin winder when winding the bobbin. (page 48)

h LCD (liquid crystal display)

Settings for the selected stitch and error messages appear in

the LCD. (page 28)

i Knee lifter

Use the knee lifter to raise and lower the presser foot. (page 83)

j Knee lifter slot

Insert the knee lifter into the slot. (page 83)

k Operation buttons (6 buttons) and sewing speed

controller

Use these buttons and the slide to operate the sewing machine.

(page 15)

l Flat bed attachment with accessory compartment

Store presser feet and bobbins in the accessory compartment

of the flat bed attachment. When sewing cylindrical pieces,

remove the flat bed attachment. (page 16)

m Thread cutter

Pass the threads through the thread cutter to cut them. (page

59)

n Thread guide plate

Pass the thread around the thread guide plate when threading

upper thread. (page 57)

■ Right-side/Rear View

a Handle

Carry the sewing machine by its handle when transporting the

machine.

b Presser foot lever

Raise and lower the presser foot lever to raise and lower the

presser foot. (page 65)

c Main power switch

Use the main power switch to turn the sewing machine ON and

OFF. (page 26)

d Foot controller with retractable cord

Depress the foot controller to control the speed of the machine.

(page 73)

e Power cord receptacle

Insert the power cord into the machine receptacle. (page 26)

f Air vent

The air vent allows the air surrounding the motor to circulate. Do

not cover the air vent while the sewing machine is being used.

g Foot controller jack

Insert the foot controller plug into its jack on the machine. (page

73)

h Speaker

i USB port for computer

In order to import/export patterns between a computer and the

machine, plug the USB cable into the USB port. (page 32, 179,

253)

j USB port for mouse (page 32)

k Primary (top) USB port for media

In order to send patterns from/to USB media, plug the USB

media directly into the USB port. (page 178, 252)

l Touch pen holder

Use the touch pen holder to hold the touch pen when not in use.

m Handwheel

Rotate the handwheel toward you (counterclockwise) to raise

and lower the needle. The wheel should be turned toward the

front of the machine.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother Innov-is Ie Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother Innov-is Ie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info