718768
45
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
Troubleshooting
43
APPENDIX
3
If the machine stops operating correctly, check the
following possible problems before requesting service.
You can solve most problems by yourself. If you need
additional help, the Brother Solutions Center offers the
latest FAQs and troubleshooting tips. Visit us at “ http://
s.brother/cpjae ”.
If the problem persists, contact your Brother dealer or the
nearest Brother authorized service center.
List of symptoms
Check the following possible problems before requesting
service. If the reference page is “*”, contact your authorized
Brother dealer or the nearest Brother authorized service
center.
Getting ready
While embroidering
Troubleshooting
Symptom, Cause/solution
Reference
Cannot thread the needle.
Needle is not in the correct position.
Press the “Needle position” button to raise the
needle.
6
Needle is installed incorrectly. 18
Needle is turned, bent or the point is dull. 18
Upper threading is incorrect.
The needle threader lever is not lowered until it
clicks.
15
The needle threader hook is bent and does not
pass through the eye of the needle.
*
The needle threader lever cannot be moved or
returned to its original position.
*
Bobbin thread does not wind neatly on the bobbin.
The thread is not passed through the bobbin
winding thread guide correctly.
11
The thread that was pulled out from the bobbin-
winding thread guide was incorrectly wound onto
the bobbin.
13
The empty bobbin was not set on the pin
properly.
11
While winding the bobbin, the bobbin thread was
wound below the bobbin winder seat.
The thread was incorrectly passed under the
pretension disk on the bobbin-winding thread
guide.
Remove any entangled thread, and then wind
the bobbin.
11, 42
The bobbin thread cannot be pulled up.
Bobbin is set incorrectly. 13
Nothing appears in the LCD.
Main power switch is not turned on. 9
The plug of the power cord is not inserted into an
electrical outlet.
9
The LCD screen is fogged up.
Condensation has formed on the LCD screen.
After a while, the cloudiness will disappear.
The operation keys do not respond, or the key
response is too sensitive.
A glove is worn when the keys are pressed.
The keys are pressed with a fingernail.
A non-electrostatic touch pen is being used.
The sensitivity of the operation keys is not set for
the user.
6, 11
The machine light does not come on.
[Light] is set to [OFF] in the settings screen. 10
Embroidery unit does not operate.
Embroidery unit is not attached correctly. 19
Symptom, Cause/solution
Reference
Machine does not operate.
“Start/Stop” button was not pressed. 6
The bobbin winder shaft is pushed to the right. 11
There is no pattern selected. 24
Presser foot is not lowered. 16
Needle breaks.
Needle is installed incorrectly. 18
Needle clamp screw is not tightened. 18
Needle is turned or bent. 18
Using improper needle or thread for the selected
fabric.
18
Upper thread tension is too tight. 29
Spool of thread is set incorrectly. 11
There are scratches around the opening in the
needle plate.
*
There are scratches around the opening in the
presser foot.
*
There are scratches on the bobbin case. *
Symptom, Cause/solution
Reference
45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother Innov-is M240ED wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother Innov-is M240ED

Brother Innov-is M240ED Bedienungsanleitung - Deutsch - 52 seiten

Brother Innov-is M240ED Bedienungsanleitung - Holländisch - 52 seiten

Brother Innov-is M240ED Bedienungsanleitung - Französisch - 52 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info