Bedienungsanleitung Brother Innov-is M240ED (Seite 48 von 52) (Englisch)

718768

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Troubleshooting

Error messages

When erroneous operations are performed messages and advice on operation will be displayed on the LCD. Follow what is

displayed. If you press or do the operation correctly while the error message is displayed, the message disappears.

Error messages Cause/solution

A malfunction occurred. Turn the machine off, then

on again.

This message is displayed if some malfunction occurs.

Turn the machine off, then back on again.

If this message continues to appear, the machine may be malfunctioning.

Please contact your authorized Brother dealer or the nearest Brother

authorized service center.

Cannot change the configuration of the characters. This message is displayed when there are too many characters and the

curved character configuration is impossible.

Cannot change the font since some letters are not

included to the selected font.

This message appears when the font of the embroidery character pattern is

changed to one that does not include characters used in the pattern.

Cannot recognize the data for the selected pattern.

The data may be corrupted. Please turn off the

power and turn on again.

This message appears when you try to retrieve pattern data that is invalid.

Since any of the following may be the cause, check the pattern data.

• The pattern data is damaged.

• The data that you tried to retrieve was created using another

manufacturer’s data design system.

Turn the machine off, then on again to return it to its normal condition.

Check and rethread the upper thread. This message is displayed when the upper thread is broken or not threaded

correctly, and the “Start/Stop” button, etc. is pressed.

Data volume is too large for this pattern. This message is displayed when the patterns you are editing take up too

much memory, or if you are editing too many patterns for the memory.

Lower the presser foot lever. This message is displayed when a button, such as the “Start/Stop” button,

was pressed while the presser foot was raised.

Not enough available memory to save. This message is displayed when the memory is full and the pattern cannot

be saved.

Not enough available memory to save the pattern.

Delete another pattern?

This message is displayed when the memory is full and the pattern cannot

be saved.

Press and delete a previously saved embroidery pattern to save the

current one.

Press to return to the original screen without saving.

OK to recall and resume previous memory? This message appears if the machine is turned off while embroidering, then

turned on again.

Press to return the machine to the condition (pattern position and

number of stitches) when it was turned off. Follow the procedure described

in “If the thread breaks or the bobbin runs out of thread during embroidering”

on page 28 to align the needle position and embroider the remainder of the

pattern.

Pattern extends to the outside of embroidery frame. This message appears when the selected embroidery pattern is larger than

the embroidery frame selected when [Embroidery Frame Identification View]

is set to [ON].

Pattern extends to the outside of embroidery frame.

Add no additional characters.

This message is displayed when the character pattern combination is too

large to fit in the embroidery frame. Change the character pattern size or

layout the patterns to fit the embroidery frame. If [Embroidery Frame

Identification View] is set to [ON], setting to [OFF] or selecting larger frame

may help.

Pattern extends to the outside of embroidery frame.

This function cannot be used at this time.

This message appears when the embroidery character pattern is resized or

switched between written vertically/horizontally so that it is too large for the

embroidery frame.

Preventive maintenance is recommended. Once this message appears, it is recommended to take your machine to an

authorized Brother dealer or nearest Brother authorized service center for a

regular maintenance check. Although this message will disappear and the

machine will continue to function once you press , the message will

display several more times until the appropriate maintenance is performed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother Innov-is M240ED Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother Innov-is M240ED

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info