718769
55
Zoom out
Zoom in
Vorherige Seite
1/100
Nächste Seite
Utility stitches
53
VARIOUS STITCHES
3
e
Stitch between the straight stitches and pull out the
threads for the straight stitches.
Shell tuck stitching
The gathers that look like shells are called “shell tucks”. They
are used to decorate trims, the front of blouses or cuffs made
of thin fabrics.
a
Draw equally spaced lines along the bias, and then fold
the fabric along the lines.
b
Attach zigzag foot “J”.
c
Select a stitch, and then increase the thread tension.
For details, refer to “Stitch Chart” on page 35.
d
Sew while making sure that the needle drops slightly
off the edge of the fabric.
One fold at a time, continue folding the fabric along the
line, then sewing it.
e
After sewing is finished, remove the fabric. Unfold the
fabric, and then iron the tucks down to one side.
Joining
Decorative bridging stitches can be sewn over the seam
allowance of joined fabrics. This is used when making a crazy
quilt.
a
Attach zigzag foot “J”.
b
Sew together the right sides of the two pieces of fabric,
and then open up the seam allowances.
c
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
d
Turn the fabric over so that the right side faces up, and
then sew over the seam with the center of the presser
foot aligned with the seam.
Using the twin needle
With the twin needle, you can sew two parallel lines of the
same stitch with two different threads. Both upper threads
should have the same thickness and quality.
a
Press and install the twin needle.
For details on installing a needle, refer to “Replacing
the Needle” on page 22.
b
Pass the first upper thread behind the needle bar
thread guide.
For details, refer to steps a through j of
“Threading the upper thread” on page 17.
c
Manually thread the left needle with the first upper
thread.
Pass the thread through the eye of the needle from the
front.
No. 2-05
Stitch
1 Needle drop point
a
No. 2-07 2-08 2-09
Stitch
CAUTION
Only use the twin needle (2/11 needle, part
code: X59296-121), and never use the needle
threader with the twin needle.
Otherwise, the needle may break or the
machine may be damaged.
55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

brother-innov-is-m280d

Suche zurücksetzen

  • Bei der Brother M280d kann ich die Nähnadel nicht mehr einlegen - ich finde kein Loch dafür Eingereicht am 1-11-2022 18:20

    Antworten Frage melden
  • Halo iher lieben.Hab ein Problem.Mein Broder 280D 6monate alt zeigt Sicherheit vorihtung aktiviert.Da ich Neuling bin weiß ich nicht WHO ich was ausschalten mus Eingereicht am 13-6-2022 21:40

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother Innov-is M280D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother Innov-is M280D

Brother Innov-is M280D Bedienungsanleitung - Deutsch - 100 seiten

Brother Innov-is M280D Bedienungsanleitung - Holländisch - 100 seiten

Brother Innov-is M280D Bedienungsanleitung - Französisch - 100 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info