Bedienungsanleitung Brother Innov-is NV1040SE (Seite 45 von 120) (Englisch)

718767

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

Sewing

Basic operations B-37

STARTING TO SEW

Automatic reinforcement stitching

After selecting a stitch motif, turn on the automatic

reinforcement stitching function before sewing, and the

machine will automatically sew reinforcement stitches (or

reverse stitches, depending on the stitch motif) at the

beginning and end of sewing. Refer to the table on page B-37.

Select a stitch pattern.

Press to set the automatic reinforcement stitching

function.

→ The key will be lit.

Set the fabric in the start position and begin sewing.

1 Reverse stitches (or reinforcement stitches)

→ The machine will automatically sew reverse stitches

(or reinforcement stitches) and then continue sewing.

Press (Reverse stitch button) or (Reinforcement

stitch button).

1 Reverse stitches (or reinforcement stitches)

→ The machine will sew reverse stitches (or

reinforcement stitches) and stop.

The operation performed when the button is pressed differs

depending on the selected pattern. Refer to the following table

for details on the operation that is performed when the button

is pressed.

Memo

• Some stitches, such as buttonholes and bar

tacks, require reinforcement stitches at the

beginning of sewing. If you select one of these

stitches, the machine will automatically turn on

this function (the key is lit when the stitch is

selected).

Memo

• When selecting the stitches below, the machine

will automatically sew reverse stitches at the

beginning of the stitch.

• If you press the “Start/Stop” button to pause

sewing, press it again to continue. The machine

will not sew reverse/reinforcement stitches again.

Memo

• To turn off the automatic reinforcement stitching

function, press so that the key is no longer lit.

Reverse stitch

button

Reinforcement

stitch button

When the automatic

reinforcement

stitching function is

not active while

selecting stitches

such as examples

shown below:

Machine starts

sewing the stitches

and only sews

reverse stitches

while holding the

Reverse stitch

button.

Machine sews 3 - 5

reinforcement

stitches while

holding the

Reinforcement stitch

button.

When the automatic

reinforcement

stitching function is

active while selecting

stitches such as

examples shown

below:

Machine sews

reverse stitches at

the beginning and

end of sewing.

Machine sews

reverse stitches at

the beginning and

reinforcement

stitches at the end of

sewing.

When the automatic

reinforcement

stitching function is

not active while

selecting stitches

such as examples

shown below:

Machine starts

sewing the stitches

and only sews

reverse stitches

while holding the

Reverse stitch

button.

Machine starts

sewing the stitches

and sews 3 - 5

reinforcement

stitches while

holding the

Reinforcement stitch

button.

When the automatic

reinforcement

stitching function is

active while selecting

stitches such as

examples shown

below:

Machine sews

reinforcement

stitches at the

beginning and

reverse stitches at

the end of sewing.

Machine sews

reinforcement

stitches at the

beginning and end of

sewing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother Innov-is NV1040SE Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother Innov-is NV1040SE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info