Bedienungsanleitung Brother Innov-is XP1 (Seite 130 von 236) (Englisch)

718773

130

Zoom out

Zoom in

Vorherige Seite

1/236

Nächste Seite

SEWING THE STITCHES

128

Press to cancel the free motion sewing

mode.

 Rotate the handwheel toward you

(counterclockwise) to raise the feed dogs.

After sewing, make sure to remove the

straight stitch needle plate and presser foot

“C”, and reinstall the regular needle plate.

Using free motion Open Toe Quilting Foot “O”

The free motion open toe quilting foot “O” is used

for free motion quilting with zigzag or decorative

stitches or for free motion quilting of straight lines on

fabric with an uneven thickness. Various stitches

can be sewn using free motion open toe quilting foot

“O”. For details on the stitches that can be used,

refer to “STITCH SETTING CHART” on page 218.

Free motion open toe quilting foot “O”

Press to set the machine to free motion

sewing mode.

 The key appears as , the quilting foot is raised to

the necessary height, and then the feed dogs are

lowered for free motion sewing.

Select a stitch.

Remove the presser foot holder (page 73).

Attach free motion open toe quilting foot

“O” by positioning the pin of the quilting

foot above the needle clamp screw and

aligning the lower-left of the quilting foot

and the presser bar.

a Pin

b Needle clamp screw

c Presser bar

Hold the quilting foot in place with your

right hand, and tighten the presser foot

holder screw using the multi-purpose

screwdriver with your left hand.

* Use the multi-purpose screw driver setting the

position to “1”. (page 24)

a Presser foot holder screw

Note

• Free motion open toe quilting foot “O” can

also be used with the straight stitch needle

plate. We recommend using free motion

open toe quilting foot “O” with free motion

sewing of fabrics of uneven thicknesses.

• When using the straight stitch needle plate,

all straight stitches become middle needle

position stitches. You cannot change the

needle position using the L/R Shift.

Memo

• Normally, the feed dogs are raised for

regular sewing.

• Do not be discouraged with your initial

results. The technique requires practice.

Memo

• In order to sew with a balanced tension, it

may be necessary to adjust the upper

thread tension (page 87). Test with a sample

piece of quilting fabric.

Memo

• When stitch Q-01 or 1-31 is selected, free

motion quilting foot “C” is indicated in the

upper-left corner of the screen. When the

other stitches are selected, free motion

open toe quilting foot “O” is indicated in the

screen.

Note

• Make sure that the quilting foot is not

slanted.

CAUTION

• Be sure to securely tighten the screws with the

included multi-purpose screwdriver.

Otherwise, the needle may touch the quilting

foot, causing it to bend or break.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother Innov-is XP1 Seite 130

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother Innov-is XP1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info