Bedienungsanleitung Brother Innov-is XP1 (Seite 212 von 236) (Englisch)

718773

212

Zoom out

Zoom in

Vorherige Seite

1/236

Nächste Seite

TROUBLESHOOTING

210

Upper thread breaks. Machine is not threaded correctly (used the

wrong spool cap, spool cap is loose, the

thread did not catch the needle bar threader,

etc.)

Rethread the machine correctly. 61

Knotted or tangled thread is being used. Remove any knots or tangles.

—

The selected needle is not appropriate for the

thread being used.

Select a needle that is appropriate for the type

of thread being used.

Upper thread tension is too tight. Adjust the thread tension. 87

Thread is twisted. Use scissors, etc., to cut the twisted thread

and remove it from the race, etc.

—

Needle is turned, bent or the point is dull. Replace the needle. 69

Needle is installed incorrectly. Reinstall the needle correctly. 69

There are scratches around the opening of the

needle plate.

Replace the needle plate, or consult your

authorized Brother dealer.

198

There are scratches around the opening in the

presser foot.

Replace the presser foot, or consult your

authorized Brother dealer.

There are scratches on the bobbin case. Replace the bobbin case, or consult your

authorized Brother dealer.

198

Using improper needle or thread for the

selected fabric.

Check the “Fabric/Thread/Needle

Combinations” chart.

While sewing, the thread became knotted or

tangled.

Rethread upper and lower thread. 58, 61

A bobbin designed specifically for this

machine is not used.

Incorrect bobbins will not work properly. Only

use a bobbin designed specifically for this

machine.

The thread is tangled

on the wrong side of

the fabric.

Upper threading is incorrect. Check the steps for threading the machine and

rethread the machine. Be sure that the presser

foot is in the raised position when threading

the machine so that the upper thread sets

properly in the upper tension.

Using improper needle or thread for the

selected fabric.

Check the “Fabric/Thread/Needle

Combinations” chart.

The upper thread is

too tight.

The bobbin thread is incorrectly installed. Correctly install the bobbin thread. 58

Bobbin thread

breaks.

Bobbin is set incorrectly. Reset the bobbin thread correctly. 58

Bobbin thread is incorrectly wound. Use a correctly wound bobbin. 52

There are scratches on the bobbin or it doesn’t

rotate properly.

Replace the bobbin. 58

Thread is twisted. Use scissors, etc. to cut the twisted thread

and remove it from the race, etc.

—

A bobbin designed specifically for this

machine is not used.

Incorrect bobbins will not work properly. Only

use a bobbin designed specifically for this

machine.

Fabric puckers. There is a mistake in the upper or bobbin

threading.

Check the steps for threading the machine and

rethread it correctly.

58, 61

Spool cap is set incorrectly. Check the method for attaching the spool cap,

then reattach the spool cap.

Using improper needle or thread for the

selected fabric.

Check the “Fabric/Thread/Needle

Combinations” chart.

Needle is turned, bent or the point is dull. Replace the needle. 69

Stitches are too long when sewing thin fabrics. Shorten the stitch length. 86

Thread tension is set incorrectly. Adjust the thread tension. 87

Wrong presser foot. Use the correct presser foot. 218

The stitch is not sewn

correctly.

The presser foot that is used is not appropriate

for the type of stitch that you wish to sew.

Attach the presser foot that is appropriate for

the type of stitch that you wish to sew.

218

The thread tension is incorrect. Adjust the tension of the upper thread. 87

The thread is tangled, for example, in the

bobbin case.

Remove the tangle thread. If the thread is

tangled in the bobbin case, clean the race.

198

Skipped stitches Machine is threaded incorrectly. Check the steps for threading the machine and

rethread it correctly.

Using improper needle or thread for the

selected fabric.

Check the “Fabric/Thread/Needle

Combinations” chart.

Problem Cause Solution Page

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother Innov-is XP1 Seite 212

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother Innov-is XP1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info