Bedienungsanleitung Brother JK4000 (Seite 12 von 116) (Englisch)

631247

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Operation buttons

The operation buttons help you to easily perform various basic sewing machine operations.

a Start/stop button

Press the start/stop button to start or stop sewing. The

machine sews at a low speed at the beginning of sewing

while the button is continuously pressed. When sewing

is stopped, the needle is lowered into the fabric. For

details, refer to “Starting to sew” (page 44).

b Reverse/reinforcement stitch button

Press the reverse/reinforcement stitch button to sew

reverse stitches or reinforcement stitches. Reverse

stitches are sewn by keeping the button pressed down to

sew in the opposite direction. Reinforcement stitches

are sewn by sewing 3 to 5 stitches on top of each other.

For details, refer to“Securing the stitching” (page 46).

c Needle position button

Press the needle position button to raise or lower the

needle. Pressing the button twice sews one stitch.

d Sewing speed controller

Slide the sewing speed controller to the left or right to

adjust the sewing speed.

Slide the sewing speed controller to the left to reduce

the sewing speed, or slide the speed controller to the

right to increase the sewing speed.

Operation panel

The operation panel, located on the front of the

sewing machine, allows you to select a stitch and

specify how the stitch will be sewn.

a LCD (liquid crystal display)

The number of the selected stitch (

1), the presser foot

to be used (

2), the stitch length (mm) (3), and the

stitch width (mm) (

4) are displayed here.

b Stitch length key (page 42)

Use to adjust the length of the stitch. (Press the “–” side

for a shorter stitch length, or press the “+” side for a

longer stitch length.)

c Stitch width key (page 43)

Use to adjust the width of the stitch. (Press the “–” side

for a more narrow stitch width, or press the “+” side for

a wider stitch width.)

d Automatic reverse/reinforcement stitch key (page 48)

The sewing machine can be set to automatically sew

reverse or reinforcement stitches at the beginning and

end of the stitching.

e Needle mode selection key (single/twin) (page 26)

Press this key to select the twin needle sewing setting.

Each time this key is pressed, the setting switches

between that for single needle sewing and for twin

needle sewing.

Flat bed attachment

The accessories are stored in the storage space in the

flat bed attachment.

Swing the lid of the flat bed attachment

toward you to open the storage space.

a Flat bed attachment

b Accessory compartment

X The bag of accessories is in the storage

space.

Note

● Place the accessories in the bag before

storing them in the flat bed attachment. If the

accessories are not placed in the accessory

bag when stored in the flat bed attachment,

accessories may fall out and be lost or

damaged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother JK4000 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info