Bedienungsanleitung Brother MFC-5895CW (Seite 1 von 42) (Englisch)

451225

1

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

1

Start Here

MFC-5895CW

Quick Setup Guide

UK/IRE/GEN/SAF Version 0

Before you can use the machine, read this Quick Setup Guide for the correct setup and installation.

1

Unpack the machine and check the components

WARNING

Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, please keep

these bags away from babies and children.

a Remove the protective tape and film covering the scanner glass.

b Make sure you have all components.

WARNING

Warnings tell you what to do to prevent possible personal injury.

IMPORTANT

DO NOT connect the USB cable yet (if you are using a USB

cable).

Ink Cartridges

[x4]

Black (LC1100HY-BK)

Yellow (LC1100HY-Y)

Cyan (LC1100HY-C)

Magenta (LC1100HY-M)

Quick Setup Guide

User’s Guide CD-ROM Power Cord Telephone Line Cord One Touch Labels

Note

• The components included in the box may differ depending on your country.

• Save all packing materials and the box in case for any reason you must ship your machine.

• You need to purchase the correct interface cable for the interface you want to use (for USB or network

connection).

USB cable

It is recommended to use a USB 2.0 cable (Type A/B) that is no more than 2 metres long.

Network cable

Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network.

(for UK) (for others)

2

2

Load plain A4 paper

a Pull the paper tray a completely out of the

machine.

b Open the paper tray cover a.

c With both hands, gently press and slide the

paper side guides a and then the paper length

guide b to fit the paper size.

Make sure that the triangular marks c on the

paper side guides a and paper length guide b

line up with the mark for the paper size you are

using.

d Fan the stack of paper well to avoid paper jams

and misfeeds.

e Gently put the paper into the paper tray print

side down and top edge first. Check that the

paper is flat in the tray.

1

1

IMPORTANT

Do not push the paper in too far.

3

2

1

3

3

f Gently adjust the paper side guides to the

paper with both hands. Make sure that the

paper side guides touch the edges of the

paper.

g Close the paper tray cover. Check that the

paper is flat in the tray and below the maximum

paper mark a.

h Slowly push the paper tray completely into the

machine.

i While holding the paper tray in place, pull out

the paper support a until it clicks, and then

unfold the paper support flap b.

3

Connect the power cord

and telephone line

a Connect the power cord.

WARNING

The machine must be fitted with an earthed

plug.

b Connect the telephone line cord. Connect one

end of the telephone line cord to the socket on

the machine marked LINE and the other end to

a telephone wall socket.

WARNING

Since the machine is grounded through the

power outlet, you can protect yourself from

potentially hazardous electrical conditions on

the telephone network by keeping the power

cord connected to your machine when you

connect it to a telephone line. Similarly, you

can protect yourself when you want to move

your machine by disconnecting the telephone

line first and then the power cord.

1

11

22

IMPORTANT

DO NOT connect the USB cable yet (if you are

using a USB cable).

4

4

Install the ink cartridges

WARNING

If ink gets in your eyes, wash them out with

water at once, and if irritation occurs consult a

doctor.

a Make sure that the power is turned on.

The LCD shows:

b Open the ink cartridge cover a.

c Remove the green protective part a.

d Unpack the ink cartridge.

IMPORTANT

The telephone line cord MUST be connected

to the socket on the machine marked LINE.

Note

If you are sharing one telephone line with an

external telephone, connect it as shown below.

1 Extension telephone

2 External telephone

Please make sure you use an external telephone

with a cable no more than 3 metres long.

Note

If you are sharing one telephone line with an

external telephone answering machine, connect it

as shown below.

Set the receive mode to External TAD if

you have an external answering machine.

See Choose a Receive Mode on page 6.

For additional details, see Connecting an

external TAD (telephone answering device)

in Chapter 7 of the User’s Guide.

11

22

Note

Do not throw away the green protective part. You

will need it if you transport the machine.

No Cartridge

Black

Install Ink

1

1

1

5

e Turn the green knob on the protective yellow

cap clockwise until it clicks to release the

vacuum seal, then remove the cap a.

f Take care to match the colour of the lever a

with the cartridge colour b, as shown in the

diagram below.

g Install each ink cartridge in the direction of the

arrow on the label.

h

Gently push the ink cartridge until it clicks. After

all the ink cartridges are installed close the ink

cartridge cover.

5

Check the print quality

a When the preparation process has finished, the

LCD shows this message

.

Press Colour Start.

b Check the quality of the four colour blocks a

on the sheet. (black/yellow/cyan/magenta)

1

1

2

Note

The machine will prepare the ink tube system for

printing. This process will take approximately four

minutes. Do not turn off the machine.

Set Paper and Press

Start

1

1

8

10

Fax Transmission Report

Your Brother machine is equipped with a

Transmission Verification Report that can be used as

confirmation that you sent a fax. This report lists the

name or fax number of the receiving party, the date,

time, and duration of the transmission, the number of

pages transmitted, and whether or not the

transmission was successful. If you want to use the

Fax Transmission Report feature, see Transmission

Verification Report in chapter 9 in the User’s Guide.

11

Set tone or pulse dialling

mode

Your machine comes set for Tone dialling service. If

you have Pulse dialling service (rotary), you need to

change the dialling mode.

a Press Menu.

b Press a or b to choose Initial Setup.

Press OK.

c Press a or b to choose Tone/Pulse.

d Press d or c to choose Pulse (or Tone).

Press OK.

e Press Stop/Exit.

12

Set the telephone line

type

If you are connecting the machine to a line that

features PBX or ISDN to send and receive faxes, it is

necessary to change the telephone line type

accordingly by completing the following steps.

a Press Menu.

b Press a or b to choose Initial Setup.

Press OK.

c Press a or b to choose Phone Line Set.

d Press d or c to choose Normal, PBX or ISDN.

Press OK.

e Press Stop/Exit.

PBX and TRANSFER

The machine is initially set to Normal, which lets the

machine connect to a standard PSTN (Public

Switched Telephone Network) line. However, many

offices use a central telephone system or Private

Branch Exchange (PBX). Your machine can be

connected to most types of PBX. The machine’s

recall feature supports timed break recall only (TBR).

TBR will work with most PBX systems allowing you to

gain access to an outside line, or transfer calls to

another extension. The feature works when the Tel/R

key is pressed.

9

Windows

®

Macintosh

Windows

®

Macintosh

USB Wired Network

Wireless Network

13

Choose your connection type

For USB interface cable

Windows

®

, go to page 10

Macintosh, go to page 14

For Wired Network

Windows

®

, go to page 16

Macintosh, go to page 21

For Wireless Network

Windows

®

and Macintosh,

go to page 24

10

Windows

®

USB

For USB interface users

(Windows

®

2000 Professional/XP/XP Professional x64 Edition/

Windows Vista

®

/Windows

®

7)

14

Before you install

a Make sure that your computer is ON and you

are logged on with Administrator rights.

15

Install MFL-Pro Suite

a Put the supplied CD-ROM into your CD-ROM

drive. If the model name screen appears,

choose your machine. If the language screen

appears, choose your language.

b The CD-ROM main menu will appear. Click

Initial Installation.

IMPORTANT

• DO NOT connect the USB cable yet.

• If there are any programs running, close

them.

• Make sure there are no memory cards or a

USB Flash memory drive inserted into the

machine.

• The screens may differ depending on your

operating system.

• The supplied CD-ROM includes ScanSoft™

PaperPort™ 11SE. This software supports

Windows

®

2000 (SP4 or greater), XP (SP2 or

greater), XP Professional x64 Edition,

Windows Vista

®

and Windows

®

7. Update to

the latest Windows

®

Service Pack before

installing MFL-Pro Suite.

Note

If the Brother screen does not appear

automatically, go to My Computer (Computer),

double-click the CD-ROM icon, and then

double-click start.exe.

11

Windows

®

USB

Windows

®

Macintosh

USB

c Click Install MFL-Pro Suite.

d When the ScanSoft™ PaperPort™ 11SE

License Agreement window appears, click

Yes if you agree to the Software License

Agreement.

e The installation of ScanSoft™ PaperPort™

11SE will automatically start and is followed by

the installation of MFL-Pro Suite.

f When the Brother MFL-Pro Suite Software

License Agreement window appears, click

Yes if you agree to the Software License

Agreement.

g Choose Local Connection, and then click

Next. The installation continues.

h When this screen appears, go to the next step.

Note

• If this screen appears, click OK and restart

your computer.

• If the installation does not continue

automatically, open the top menu again by

ejecting and then reinserting the CD-ROM or

double-click the start.exe program from the

root folder, and continue from b to install

MFL-Pro Suite.

• For Windows Vista

®

and Windows

®

7, when

the User Account Control screen appears,

click Allow or Yes.

1

Bei meinem Drucke taucht auf dem Bildschirm nur Fehler:Init. 4F auf. Was bedeutet das und wie kann ich das reparieren ? Eingereicht am 16-7-2017 17:22
Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.

Neu registrieren

Registrieren auf E - Mails für Brother MFC-5895CW wenn:

neue Frage gestellt werden
neue Handbücher vorhanden sind

Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.

Andere Handbücher von Brother MFC-5895CW

Brother MFC-5895CW Installationsanweisung - Deutsch - 42 seiten

Brother MFC-5895CW Bedienungsanleitung - Deutsch - 234 seiten

Brother MFC-5895CW Bedienungsanleitung - Englisch - 231 seiten

Brother MFC-5895CW Bedienungsanleitung - Holländisch - 42 seiten

Brother MFC-5895CW Installationsanweisung - Holländisch - 30 seiten

Brother MFC-5895CW Bedienungsanleitung - Holländisch - 240 seiten

Brother MFC-5895CW Bedienungsanleitung - Französisch - 42 seiten

Brother MFC-5895CW Bedienungsanleitung - Französisch - 241 seiten

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.

Info