Bedienungsanleitung Brother MFC-590 (Seite 6 von 6) (Englisch)

451227

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

Install Software

You can install printer and scanner drivers and the various utility

items.

Manuals

View the Owner’s Manual and other documentation.

Brother Solutions Centre

Connect to the Brother Solutions Centre, the Service and Support

Web Site for your Brother Product.

Further information

Interactive Demonstration showing features of the Printer Driver.

You can get a variety of

information from this

CD-ROM

(For Windows

)

MFC Software Suite Installer

You can install the printer and scanner drivers and the various

utility items.

ReadMe!

You can get important information and troubleshooting tips.

Documents

View the Owner’s Manual and other documentation.

You can get a variety of

information from this

CD-ROM

(For Macintosh

)

Windows

Macintosh

What is included on the CD-ROM

For Windows NT

Workstation Version 4.0 Users

Step 1.

Check that your computer is

turned on.

You must be logged on as the Administrator.

Step 2.

Connect the MFC to your PC

with the Parallel Cable.

A. Connect the parallel interface cable to the parallel interface port of the MFC and

secure the wire clips.

B. Connect the interface cable to the printer port of the computer and secure it with

the two screws. For the location of your computer’s parallel printer port, see the

User’s Guide for your computer.

12.

Select Yes to restart your computer, and

then click Finish.

13. Click Yes to have the Control Centre

loaded each time Windows is started.

The Control Centre will appear as an

icon in the task bar. If you click No, the

Scan to key on the MFC will be

disabled. Please see Note*3.

For Apple

Macintosh

QuickDraw

Driver for OS 8.6/9.0/9.0.4/9.1 Users

Step 1.

Make sure your MFC power cord

is unplugged and your

Macintosh is turned on.

Make sure you do NOT connect your MFC to your Macintosh

Step 2.

Insert the CD-ROM into your CD-

ROM drive.

Installing MFC Software Suite

Select your language

1. When the window appears, double-

click MFC Software Suite Installer.

The Brother PC fax, Printer and Scanner drivers have

been installed and the installation is now complete.

Step 3.

Turn on the MFC by plugging in

the power cord.

Step 4.

Follow the instructions on the

screen.

(Same step as Windows

95/98/98SE/Me/2000 Users

Step 3.

, 1 to 11)

Step 3.

Restart your Macintosh so it

can recognize the new driver.

Step 4.

Connect the MFC to your

Macintosh with the USB cable,

and then turn on the MFC by

plugging in the power cord.

Step 5.

Select the Printer.

1. From the Apple menu, open the

Chooser.

2. Click to MFL Pro Colour icon you

installed. On the right side of the

Chooser, select the printer to which

you want to print. Close the Chooser.

2. Click your language to install the

printer and scanner drivers. After the

installation is completed, the screen

prompts you to restart your Macintosh.

The Brother PC fax, Printer and Scanner drivers have

been installed and the installation is now complete.

MAKE SURE THAT YOU FOLLOWED THE

SET-UP INSTRUCTIONS ON PAGE 1 TO 3

BEFORE CONTINUING

MAKE SURE THAT YOU FOLLOWED THE

SET-UP INSTRUCTIONS ON PAGE 1 TO 3

BEFORE CONTINUING

Page 6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother MFC-590 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother MFC-590

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info