Bedienungsanleitung Brother MFC-790CW (Seite 148 von 226) (Englisch)

451232

148

Zoom out

Zoom in

Vorherige Seite

1/226

Nächste Seite

136

Photo paper does not feed

properly.

When you print on Brother photo paper, make sure you always load one additional

sheet of photo paper first before loading the paper you want to print on.

Clean the paper pick

-up roller. (See Cleaning the paper pick-up roller

on page 156.)

Photo paper does not feed

properly.

When you print on Brother Photo paper, load one extra sheet of the same photo

paper in the paper tray. An extra sheet has been included in the paper package

for this purpose.

Clean the paper pick

-up roller.

(See Cleaning the paper pick-up roller on page 156.)

Machine feeds multiple pages. Make sure the paper is loaded correctly in the paper tray. (See Loading paper and

other print media on page 10.)

Check that more than two types of paper are not loaded in the paper tray at any

one time.

Printed pages are not stacked

neatly.

Make sure you are using the paper support flap. (See Loading paper and other

print media on page 10.)

Machine does not print from

Adobe

Illustrator

Try to reduce the print resolution. (See Printing for Windows

or Printing and

Faxing for Macintosh

in the Software User’s Guide on the CD-ROM.)

Printing Received Faxes

Difficulty Suggestions

Condensed print and white streaks

across the page or the top and

bottom of sentences are cut off.

You probably had a bad connection, with static or interference on the telephone

line. Ask the other party to send the fax again.

Vertical black lines when receiving. The sender's scanner may be dirty. Ask the sender to make a copy to see if the

problem is with the sending machine. Try receiving from another fax machine.

Received colour fax prints only in

black and white.

Replace the colour ink cartridges that are empty or nearly empty, and then ask the

other person to send the colour fax again. (See Replacing the ink cartridges

on page 152.)

Left and Right margins are cut off or

a single page is printed on two

pages.

Turn on Auto Reduction. (See Printing a reduced incoming fax on page 53.)

Telephone Line or Connections

Difficulty Suggestions

Dialling does not work. (No dial

tone)

Make sure the machine is plugged in and not in Power Save mode.

Check the line cord connections.

Change the Tone/Pulse setting. (See the Quick Setup Guide.)

Lift the external telephone’s handset, (or the machine’s handset or cordless

handset if available), and then dial the number to send a manual fax. Wait to hear

fax receiving tones before pressing Mono Start or Colour Start.

The machine does not answer

when called.

Make sure the machine is in the correct receiving mode for your setup. (See

Choose the Receive Mode on page 43.) Check for a dial tone. If possible, call your

machine to hear it answer. If there is still no answer, check the telephone line cord

connection. If there is no ringing when you call your machine, ask your telephone

company to check the line.

Printing (continued)

Difficulty Suggestions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother MFC-790CW Seite 148

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother MFC-790CW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info