Bedienungsanleitung Brother MFC-820CW (Seite 36 von 45) (Englisch)

451234

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

Installing the Driver & Software

STEP 2

Macintosh

Wireless

Network

Macintosh

For Wireless Network Users

For Mac OS

X 10.2.4 or greater in infrastructure mode

Important

Make sure that you have finished the

instructions from Step 1 Setting Up the

Machine on page 4 - 11.

These instructions will install your Brother machine in

a typical small office or home wireless network

environment in infrastructure mode, using a wireless

router or access point that uses DHCP to assign IP

addresses.

If you want to setup your machine in any other

wireless environment you can find instructions in the

Network User’s Guide on the CD-ROM.

You can view the Network User’s Guide by following

the instructions below.

1 Turn on your Macintosh

. Insert the Brother

CD-ROM labeled Macintosh

into your CD-ROM

drive.

2 Double-click the Documentation icon.

3 Double-click your language folder.

4 Double-click the Network User’s Guide

BH3eWLAN_UkEngNet.pdf.

To achieve optimum results with normal every day

document printing, place the Brother machine as

close to the network access point (router) as possible

with minimal obstructions. Large objects and walls

between the two devices as well as interference from

other electronic devices can affect the data transfer

speed of your documents.

First you must configure the wireless network settings

of your machine to communicate with your network

access point (router). After the machine is configured

to communicate with your access point computers on

your network will have access to the machine. To use

the machine from these computers, you will need to

install the MFL-Pro Suite Software. The following

steps will guide you through the configuration and

installation process.

1 Write down the wireless network settings of

your access point or wireless router.

SSID (Service Set ID or Network name)

_________________________

WEP Key (if needed)

_________________________

WPA-PSK (TKIP) (if needed)

_________________________

The WEP key is for 64bit encrypted networks

or 128 bit encrypted networks and can contain

both numbers and letters. If you do not know

this information you should see the

documentation provided with your access point

or wireless router. This key is a 64-bit or 128-bit

value that must be entered in an ASCII or

HEXADECIMAL format.

For example:

WPA-PSK enables a Protected Access Pre-

shared key that allows the Brother wireless

machine to associate with access points using

TKIP encryption. WPA-PSK uses a Pre-Shared

Key that is more than 7 and less than 64

characters in length.

Note

• Your machine supports WEP and WPA-

PSK(TKIP). WPA-PSK(AES) is not supported.

• Most access points and routers can store more

than one key, but they will only use one at any time

for authentication and encryption.

See Chapter 3 of the Network User’s Guide for

more details.

64 bit ASCII: Uses 5 text characters.e.g. “Hello”

(this is case sensitive)

64 bit

Hexadecimal:

Uses 10 digits of hexadecimal

data.e.g. “71f2234aba”

128 bit ASCII: Uses 13 text characters.e.g.

“Wirelesscomms” (this is case

sensitive)

128 bit

Hexadecimal:

Uses 26 digits of hexadecimal

data.e.g.

“71f2234ab56cd709e5412aa3ba”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother MFC-820CW Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother MFC-820CW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info