Bedienungsanleitung Brother MFC-845CW (Seite 46 von 55) (Englisch)

451214

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

Installing the Driver & Software

STEP2

Macintosh

Wireless

Network

6 Enter the SSID you wrote down in step 1 using

the dial pad to choose each letter or number.

You can use the and keys to move the

cursor left and right. For example, to enter the

letter a, press the 2 key on the dial pad once.

To enter the number 3, press the 3 key on the

dial pad seven times.

The letters appear in this order: lower case,

upper case, numbers and then special letters.

(For more information, see Entering Text on

page 50.)

Press OK when you have entered all the

characters.

7 Press a or b to choose Infrastructure,

then press OK.

8 Use the a, b and OK keys to choose one of

the options below: If your network is configured

for Authentication and Encryption you must

match the settings used for your network.

No Authentication or Encryption: Choose

Open System, press OK then choose None

for Encryption Type and press OK. Then

press 1 for Yes to apply your settings. Go to

step 11.

No Authentication with WEP Encryption:

Choose Open System, press OK then use the

a or b to choose WEP for the

Encryption Type and press OK. Go to

step 9.

Authentication with WEP Encryption:

Choose Shared Key, press OK. Go to step 9.

Authentication with WPA/WPA2-PSK (TKIP

or AES) Encryption: Choose WPA/WPA2-

PSK, press OK. Go to step 10.

9 Choose the appropriate key number and press

OK. Enter the WEP key you wrote down in

step 1 using the dial pad to choose each letter

or number. You can use the and keys

to move the cursor left and right. For example,

to enter the letter a, press the 2 key on the dial

pad once. To enter the number 3, press the 3

key on the dial pad seven times.

The letters appear in this order: lower case,

upper case, numbers and then special letters.

(For more information, see Entering Text on

page 50.)

Press OK when you have entered all the

characters, then press 1 for Yes to apply your

settings. Go to step 11.

Most access points and routers can store

more than one key, but they will only use

one at any time for authentication and

encryption.

10 Press a or b to choose TKIP or AES for

Encryption Type and press OK.

Enter the WPA/WPA2-PSK password you

wrote down in step 1 using the dial pad to

choose each letter or number. You can use the

and keys to move the cursor left and

right. For example, to enter the letter a, press

the 2 key on the dial pad once. To enter the

number 3, press the 3 key on the dial pad

seven times.

The letters appear in this order: lower case,

upper case, numbers and then special letters.

(For more information, see Entering Text on

page 50.)

Press OK when you have entered all the

characters, then press 1 for Yes to apply your

settings. Go to step 11.

11 Your machine will now try to connect to your

wireless network using the information you

have entered. If successful, Connected will

appear briefly on the LCD.

If your machine does not successfully connect

to your network, you should repeat steps 3 to

10 to make sure you have entered the correct

information.

If your access point does not have DHCP

enabled you will need to manually configure

the IP address, subnet mask and gateway of

the machine to suit your network. See the

Network User’s Guide for details.

Wireless setup is now complete. A four

level indicator on the bottom of your

machine’s LCD will show the wireless

signal strength of your access point or

router. To install the MFL-Pro Software

suite, continue to step 12.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother MFC-845CW Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother MFC-845CW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info