502679
37
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
37
Windows
®
Wireless Network
Windows
®
Macintosh
Wireless Network
d When this screen appears, choose Change
the Firewall port settings to enable network
connection and continue with the
installation. (Recommended) and click Next.
If you are using a firewall other than the
Windows
®
Firewall or the Windows
®
Firewall is
off, this screen may appear.
See the instructions provided with your firewall
software for information on how to add the
following network ports.
For network scanning, add UDP port 54925.
For network PC-Fax receiving, add UDP port
54926.
If you still have trouble with your network
connection, add UDP ports 137 and 161.
e Choose your machine from the list, and then
click Next.
f The installation of the Brother drivers will
automatically start. The installation screens
appear one after another.
g If Environmental Advice for Imaging
Equipment screen appears, click Next.
h When the On-Line Registration screen is
displayed, follow the on-screen instructions.
Click Next.
i If you do not want to set your machine as the
default printer, uncheck Set as Default Printer
and click Next.
NOTE
If your machine is not found over the network,
confirm your settings by following the
on-screen instructions. If you encounter this
failure, go to step 18-b on page 28 and setup
the wireless connection again.
If you are using WEP and the Touchscreen
displayed Connected but your machine is not
found on the network, make sure you entered
the WEP key correctly. The WEP key is case
sensitive.
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
NOTE
For Windows Vista
®
and Windows
®
7, when the
Windows
®
Security screen appears, click the
check box and click Install to complete the
installation correctly.
37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

brother-mfc-j4610dw

Suche zurücksetzen

  • wo kann ich einstellen das der drucker mit Fotopapier drucken soll? Eingereicht am 7-5-2018 17:28

    Antworten Frage melden
  • wo kann ich einstellen das der drucker mit Fotopapier drucken soll?
    Eingereicht am 7-5-2018 17:27

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother MFC-J4610DW wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother MFC-J4610DW

Brother MFC-J4610DW Installationsanweisung - Deutsch - 44 seiten

Brother MFC-J4610DW Bedienungsanleitung - Deutsch - 179 seiten

Brother MFC-J4610DW Bedienungsanleitung - Deutsch - 90 seiten

Brother MFC-J4610DW Bedienungsanleitung - Englisch - 81 seiten

Brother MFC-J4610DW Bedienungsanleitung - Englisch - 175 seiten

Brother MFC-J4610DW Installationsanweisung - Holländisch - 46 seiten

Brother MFC-J4610DW Bedienungsanleitung - Holländisch - 177 seiten

Brother MFC-J4610DW Bedienungsanleitung - Holländisch - 86 seiten

Brother MFC-J4610DW Installationsanweisung - Französisch - 44 seiten

Brother MFC-J4610DW Bedienungsanleitung - Französisch - 179 seiten

Brother MFC-J4610DW Bedienungsanleitung - Französisch - 91 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info