Bedienungsanleitung Brother MFC-J475DW (Seite 24 von 36) (Englisch)

585607

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

For Wireless Network Users

Manual setup from the

control panel using the

Setup Wizard

(Windows

Macintosh and mobile devices)

a If you began the wireless setup from step 7 on

page 9, press a or b to choose Setup Wizard

and press OK. Then go to c.

All other users go to b.

b On your machine, press Menu.

Press a or b to choose Network. Press OK.

Press a or b to choose WLAN. Press OK.

Press a or b to choose Setup Wizard. Press

OK.

c When Enable WLAN? is displayed, press OK

to accept.

This will start the wireless setup wizard.

To cancel, press Stop/Exit.

d The machine will search for available SSIDs. It

will take several seconds to display a list of

available SSIDs.

If a list of SSIDs is displayed, press a or b to

choose the SSID you wrote down in step 17-b

on page 21. Press OK.

If the wireless access point/router of the

selected SSID supports WPS, and the machine

asks to use WPS, go to e.

If the machine asks you to enter a Network

Key, go to f.

Otherwise, go to g .

e Press 1 (Yes) to connect your machine using

WPS. (If you choose 2 (No) to continue manual

configuration, go to f to enter a Network Key.)

When the LCD shows Start WPS, press the

WPS button on your wireless access

point/router, and then press 1 (Next) to

proceed. Go to g.

f Enter the Network Key you wrote down in

step 17-b on page 21 using the dial pad to

choose each letter or number.

Press OK when you have entered all the

characters, then press 1 (Yes) to apply your

settings.

g Your machine will now try to connect to your

wireless network. It may take a few minutes.

Wireless setup is now complete.

To install MFL-Pro Suite, continue to

step 19.

For Windows

users:

Now go to

Page 28

For Macintosh users:

Now go to

Page 31

You must have the wireless settings you

wrote down for your network in step 17-b on

page 21 before you proceed.

NOTE

• If the list is blank, check that the wireless

access point/router has power and is

broadcasting the SSID. Move your machine

closer to the wireless access point/router and

try starting from a again.

• If your access point is set to not broadcast the

SSID, you will have to manually add the SSID

name. For more information, see Configure

Your Wireless Network When the SSID Is Not

Broadcast in the Software and Network User’s

Guide.

NOTE

The letters appear in this order: lower case, upper

case and then numbers. To move the cursor left

or right, press d or c.

(For more information, see Entering Text for

Wireless Settings on page 34.)

NOTE

For mobile device users:

• Connect your mobile device to a wireless

access point/router using a Wi-Fi connection.

• Download and install Brother iPrint&Scan

(Android™/iOS/Windows

Phone) from your

mobile device’s application download site. You

can also use AirPrint (iOS) with this machine.

• To download the User’s Guide for the

application you are using (Brother

iPrint&Scan/AirPrint), visit the Brother

Solutions Center at

http://solutions.brother.com/

and click Manuals

on your model’s page.

• If you began the setup from step 7 on page 9,

go back to step 8 to continue the machine

settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother MFC-J475DW Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother MFC-J475DW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info