Bedienungsanleitung Brother MFC-J6510DW (Seite 26 von 38) (Englisch)

451241

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

For Wireless Network Users

Manual setup from the

control panel using the

Setup Wizard (Macintosh,

Mobile Devices and

Windows

)

a If you began the wireless setup from step 7 on

page 7 (for Macintosh and mobile devices),

press a or b to choose Setup Wizard and

press OK.

Then go to c.

All other users go to b.

b On your machine, press Menu.

Press a or b to choose Network and press

OK.

Press a or b to choose WLAN and press OK.

Press a or b to choose Setup Wizard and

press OK.

c When Network I/F switched to

Wireless is displayed, press OK to accept.

This will start the wireless setup wizard.

To cancel, press Stop/Exit.

d The machine will search for available SSIDs. It

will take several seconds to display a list of

available SSIDs.

If a list of SSIDs is displayed, press a or b to

choose the SSID you wrote down in step 18-a

on page 25, then press OK.

If the wireless access point/router of the

selected SSID supports WPS and the machine

asks to use WPS, go to e.

If the machine asks you to enter a Network

Key, go to f.

Otherwise, go to g.

e Press 1 (Yes) to connect your machine using

WPS. (If you choose 2 (No) to continue manual

setting, go to f to enter a Network Key.)

When the LCD shows Start WPS, press the

WPS button on your wireless access

point/router, and then press 1 (Next) to

proceed.

Go to g.

f Enter the Network Key you wrote down in

step 18-a on page 25 using the dial pad to

choose each letter or number.

The letters appear in this order: lower case,

upper case and then numbers. To move the

cursor left or right, press d or c.

(For more information, see Entering Text for

Wireless Settings on page 37.)

Press OK when you have entered all the

characters, then press 1 (Yes) to apply your

settings.

g Your machine will now try to connect to your

wireless network. It may take a few minutes.

h A connection result message appears for

60 seconds on the LCD and a wireless LAN

report will automatically be printed.

If the connection failed, check the error code on

the printed report and refer to Troubleshooting

on page 28.

Wireless setup is now complete. A four

level indicator on the bottom of your

machine’s LCD will show the wireless

signal strength of your access

point/router.

For computer users, please install

MFL-Pro Suite, continue to step 20.

For Macintosh Users:

Now go to

Page 34

For Windows

Users:

Now go to

Page 30

Note

• If a list of SSIDs is not displayed, make sure

your access point is on. Move your machine

closer to the access point and try starting

from b again.

• If your access point is set to not broadcast the

SSID, you will have to manually add the SSID

name. For details, see the Network User’s

Guide.

Select Method

Select & Press

Setup with PC

WPS/AOSS

WPS w/PIN Code

Setup Wizard

Note

Mobile Device users: When using applications

such as AirPrint or Brother iPrint&Scan with your

machine, please refer to the application’s User’s

Guide. To download the User’s Guide, go to the

Manuals download section of your model’s home

page on the Brother Solutions Center at

http://solutions.brother.com/

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother MFC-J6510DW Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother MFC-J6510DW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info