Bedienungsanleitung Brother MFC-J6710DW (Seite 24 von 38) (Englisch)

451242

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

For Wireless Network Users

For wireless network interface users

Before you begin

First you must configure the wireless network settings of your machine to communicate with your network access

point/router. After the machine is configured to communicate with your access point/router, computers and mobile

devices on your network will have access to the machine. To use the machine from a computer, you will need to

install the drivers and software. The following steps will guide you through the configuration and installation

process.

To achieve optimum results with normal everyday document printing, place the Brother machine as close to the

network access point/router as possible with minimal obstructions. Large objects and walls between the two

devices as well as interference from other electronic devices can affect the data transfer speed of your documents.

Due to these factors, wireless may not be the best method of connection for all types of documents and

applications. If you are printing large files, such as multi-page documents with mixed text and large graphics, you

may want to consider choosing wired Ethernet for a faster data transfer or USB for the fastest throughput speed.

Although the Brother MFC-J6510DW and MFC-J6710DW can be used in both a wired and wireless network, only

one of the connection methods can be used at a time.

The following instructions are for infrastructure mode (connected to a computer through an access point/router).

Infrastructure Mode

a Access point/router

b Wireless Network machine (your machine)

c Wireless capable computer connected to the access point/router

d Wired computer connected to the access point/router

e Mobile Device connected to the wireless access point/router

Please make sure the wireless network settings of the machine match the access point/router.

Note

If you have previously configured the wireless settings of the machine you must reset the network (LAN)

settings before you can configure the wireless settings again.

On your machine, press Menu. Press a or b to choose Network and press OK.

Press a or b to choose Network Reset, and then press OK.

Press 1 twice for Yes to accept the change.

Note

To set up your machine in Ad-hoc mode (connected to a wireless capable computer without an access

point/router) you can find instructions in the Network User’s Guide on the documentation CD-ROM.

Also you can download the Network User’s Guide by following the instructions below.

1 Turn on your computer. Insert the installation CD-ROM into your CD-ROM drive.

For Windows

2 Choose your model and the language. The CD-ROM top menu will appear.

3 Click Documentation, and follow the on-screen instructions.

For Macintosh:

2 Double-click Documentation, and follow the on-screen instructions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother MFC-J6710DW Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother MFC-J6710DW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info