Bedienungsanleitung Brother MFC-J875 (Seite 33 von 46) (Englisch)

681573

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

For Wireless Network Users

Wireless Network

Manual setup from the

control panel using the

Setup Wizard

(Windows

Macintosh and mobile devices)

a Press .

Press Setup Wizard.

When Enable WLAN? or Switch Network

interface to wireless? is displayed,

press Yes to accept.

This will start the wireless setup wizard.

To cancel, press No.

b The machine will search for available SSIDs. It

will take several seconds to display a list of

available SSIDs.

If a list of SSIDs is displayed, press a or b to

choose the SSID you wrote down in step 16-b

on page 30.

Press OK.

If the wireless access point/router of the

selected SSID supports WPS and the machine

asks to use WPS, go to c.

If the machine asks you to enter a Network

Key, go to d.

Otherwise, go to e.

c Press Yes to connect your machine using

WPS. (If you choose No (Manual) to

continue manual configuration, go to d to enter

a Network Key.)

When the Touchscreen instructs you to start

WPS, press the WPS button on your wireless

access point/router, and then press Next to

proceed.

Go to e.

d Enter the Network Key you wrote down in

step 16-b on page 30 using the Touchscreen.

Press OK when you have entered all the

characters, then press Yes to apply your

settings.

e Your machine will now try to connect to your

wireless network. It may take a few minutes.

Wireless setup is now complete.

The Wi-Fi LED on the control panel

lights up, indicating that the machine’s

Network I/F is set to WLAN.

To install MFL-Pro Suite, continue to

step 18.

For Windows

users:

Now go to

Page 37

For Macintosh users:

Now go to

Page 40

You must have the wireless settings you

wrote down for your network in step 16-b on

page 30 before you proceed.

NOTE

• If the list is blank, check that the wireless

access point/router has power and is

broadcasting the SSID. Move your machine

closer to the wireless access point/router and

try starting from a again.

• If your access point is set to not broadcast the

SSID, you will have to manually add the SSID

name. For more information, see Configure

Your Wireless Network When the SSID Is Not

Broadcast in the Software and Network User’s

Guide.

NOTE

Press to cycle between lower case and

upper case. Press to cycle between

letters, numbers and special characters. (The

characters available may differ depending on

your country.) To move the cursor to the left or

right, press d or c.

(For more information, see Entering Text for

Wireless Settings on page 44.)

NOTE

For mobile device users:

• Connect your mobile device to a wireless

access point/router using Wi-Fi connection.

• Download and install Brother iPrint&Scan

(Android™/iOS/Windows

Phone) from your

mobile device’s application download site. You

can also use AirPrint (iOS) with this machine.

• To download the User’s Guide for the

application you are using (Brother

iPrint&Scan/AirPrint), visit the Brother

Solutions Center at

http://solutions.brother.com/

and click Manuals

on your model’s page.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother MFC-J875 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother MFC-J875

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info