Bedienungsanleitung Brother NX-2000 (Seite 77 von 164) (Englisch)

463656

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

SEWING THE STITCHES

Utility Stitches

■ Free-motion Quilting

For free-motion quilting, use free-motion quilting

foot “C” and free-motion open toe quilting foot “O”

depending on the stitch that is selected, and set the

machine to free-motion sewing mode. In this mode,

the feed dogs are automatically lowered so the

fabric can be moved freely, and the presser foot is

raised to the necessary height for free-motion

sewing.

■ Free-motion Quilting Using Free-motion

Quilting Foot “C”

The free-motion quilting foot “C” is used for free-

motion sewing using a straight stitch. Be sure to

select a straight stitch with the middle (center)

needle position or .

Free-motion quilting foot “C”

Press to lower the feed dogs and to set

the machine to free-motion sewing mode.

→ The feed dogs are lowered, and the quilting foot is

raised to the necessary height for free-motion

sewing.

Select or .

→ When stitch Q-01 or 1-30 is selected, free-motion

quilting foot “C” is indicated in the upper-left corner

of the screen.

Remove the presser foot holder (see page 72).

Attach free-motion foot “C” at the front with

the presser foot holder screw aligned with the

notch in the quilting foot.

a Presser foot holder screw

b Notch

Hold the quilting foot in place with your right

hand, and then tighten the presser foot holder

screw using the screwdriver in your left hand.

a Presser foot holder screw

CAUTION

• With free-motion quilting, control the feeding speed

of the fabric to match the sewing speed. If the fabric

is moved faster than the sewing speed, the needle

may break or other damage may result.

• When using free-motion quilting foot “C”, be sure to

select one of the patterns with a center needle

position (Q-01 or 1-30). Using any other stitch may

result in the needle striking the quilting foot, causing

damage or injuries.

Memo

• When starting to sew, the internal sensor detects the

thickness of the fabric, and the quilting foot is raised

to the height specified in the machine settings

screen. Press , and then press or

to change the value beside “FREE MOTION

FOOT HEIGHT” on P. 2 of machine settings screen

(see page 20). Increase the height that the quilting

foot is raised, for example, when sewing puffy or

thick fabrics, decrease for better control of thin

fabrics.

• In order to sew with a balanced tension, it may be

necessary to adjust the upper thread tension (see

page 43). Test with a sample piece of quilting fabric.

Note

Make sure that the quilting foot is not slanted.

CAUTION

• Be sure to securely tighten the screws with the

screwdriver. Otherwise, the needle may touch the

quilting foot, causing it to bend or break.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother NX-2000 Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother NX-2000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info