Bedienungsanleitung Brother NX-2000 (Seite 110 von 164) (Englisch)

463656

110

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

EDITING STITCH PATTERNS

108

EDITING STITCH PATTERNS

Using the editing functions, you can change the patterns in a variety of ways, such as resizing them or flipping them

to create a mirror image.

■ Key Functions

Memo

Depending on the pattern that is selected, some editing functions may not be available.

No. Key Name Function Page

a Screen lock key Press this key to lock the screen.

When the screen is locked, the various settings, such as the stitch width and stitch

length, are locked and cannot be changed. Press this key again to unlock the

settings.

b Image check key Press this key to check an image of the selected patterns (characters). 103, 104

c Automatic

reinforcement stitch key

Press this key to select the automatic reinforcement stitching setting. If you select

this setting before sewing, the machine will automatically sew reinforcement

stitches at the beginning and end of stitching. Press this key again to cancel the

setting.

d Automatic thread

cutting key

Press this key to select the automatic thread cutting setting. If you select this

setting before sewing, the machine will automatically cut the thread at the end of

stitching. Press this key again to cancel the setting.

e Horizontal mirror image

key

Press this key to create a horizontal mirror image of the selected stitch pattern. 109

f Vertical mirror image

key

Press this key to create a vertical mirror image of the selected stitch pattern. 109

g Needle mode selection

key (single/twin)

Press this key to select the setting for twin needle sewing. Each time this key is

pressed, the setting switches between that for single needle sewing and for twin

needle sewing.

h Elongation key If a 7 mm satin stitch pattern is selected, press this key to select from five settings

for changing the pattern length without changing the zigzag width or stitch length.

109

i Single/repeat sewing

key

Press this key to switch between sewing the pattern a single time or repeatedly. 110

j Stitch settings key Press this key to open the screen for changing the stitch width, stitch length and

thread tension for the selected pattern. Normally, the machine has default settings.

k Back to beginning key When sewing is stopped, press this key to return to the beginning of the pattern. 111

l Delete key If the wrong pattern was accidentally selected, press this key to erase it. If patterns

have been combined, each press of this key erases the last pattern in the

combination.

103, 104

m Memory key Press this key to save the pattern combination. 119

n Size key Press this key after selecting a pattern to change the size of the pattern (large or

small).

109

o Thread density key Press this key after selecting a pattern to change the stitching density of the

pattern.

110

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother NX-2000 Seite 110

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother NX-2000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info