Bedienungsanleitung Brother P-touch 9600 (Seite 46 von 204) (Englisch)

498966

Zoom out

Zoom in

Vorherige Seite

1/204

Nächste Seite

Ch. 2 Getting Started

Getting Started

Ironing

Iron garments with transfers using normal tem-

perature settings.

Be sure to place a piece of cloth between the

iron and the label when you iron over it to pre-

vent the label from sticking to the iron.

The labels are non-toxic, however, please main-

tain the usual precautions, such as not placing

them in your mouth, etc.

Fabric tape

Fabric tape is used to attach a piece of fabric

printed with your text onto garments using an

iron. After printing the text onto fabric tape and

cutting off the label using scissors

, place the

label on an ironed garment at the location

where you wish to attach it in such a way that

the printed text can be read correctly. Cover the

label with another piece of cloth and use an

iron set to a medium-high temperature (320 to

356 °F (160 to 180 °C)) to press down firmly for

15 to 30 seconds. For more details, refer to the

instructions included with the fabric tape cas-

sette.

●

Assembling stamps

In addition to labels, your P-touch can be used

to make custom, pre-inked stamps for various

uses (optional stamp kit required). Simply design

your own customized stamps using one of the

pre-formatted stamp templates, and then affix

the printed stamp stencil to a self-inking stamp

film holder.

1 Install a stamp film cassette, and then for-

mat the stamp text in either of the following

ways:

a) Select a pre-formatted stamp template

from those available with the Auto For-

mat function (refer to page 59).

b) Type in text, and then set the Stamp func-

tion to ON (refer to page 59).

3 Print out the stamp stencil and remove its

backing paper.

4 Remove the frame from around the stamp

holder ink pad, one end at a time, and then

remove the protective seal covering the ink

pad.

5 With the glossy side of the stamp film facing

up, align one end of the stamp film with the

slit in the side of the stamp holder.

P-TOUCH

NOTE

If an Auto Format stamp template is used, it is not

necessary to set the Stamp function to ON.

NOTE

☞

If the stamp holder already contains a stamp

film, hold the stamp over a piece of scrap paper

and remove the stamp frame by pulling it off,

one end at a time. Then, slowly peel off the

stamp film. Be careful that the ink does not

splatter.

☞

Keep the stamp film holder out of the reach of

children.

☞

Avoid getting ink in your eyes or mouth. If ink

gets in your eyes or mouth, immediately wash it

with fresh water for several minutes and consult

a doctor.

☞

Keep ink off skin, clothes and important papers.

Immediately use soap to wash skin that has

come in contact with ink. Even washing may

not remove all ink.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother P-touch 9600 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother P-touch 9600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info