Bedienungsanleitung Brother P-touch 9600 (Seite 63 von 204) (Englisch)

498966

Zoom out

Zoom in

Vorherige Seite

1/204

Nächste Seite

Ch. 3 Functions

Functions

To change the setting for the Style1 function:

1 Hold down d and press 1, 2 or 3.

2 Press j or k until STYLE1 is displayed.

The setting for the text at the cursor’s cur-

rent position is shown on the left side of the

display and a sample can be seen on the

right side.

3 Press m or g until the desired setting is

displayed.

4 Press n to apply the setting.

Style2 function (STYLE2)

Two more text styles are available with the

Style2 function: ITALIC and VERTICAL. Either of

these styles can be combined with each of the

text styles available with the Style1 function.

(See Style1 function (STYLE1) on page 50.) For

samples of the available style settings, refer to

page 96. The style indicators at the top of the

display show the style of the text at the cursor’s

current position when any setting other than

NORMAL is selected.

The VERTICAL style setting, which rotates each

character 90

° counterclockwise and prints the

text vertically along the length of the label, is

different from the Text Rotation function

(page 54), which rotates each text block 90

counterclockwise and prints the text horizon-

tally along the length of the label.

To change the setting for the Style2 function:

1 Hold down d and press 1, 2 or 3.

2 Press j or k until STYLE2 is displayed.

The setting for the text at the cursor’s cur-

rent position is shown on the left side of the

display and a sample can be seen on the

right side.

3 Press m or g until the desired setting is

displayed.

NOTE

This step may be skipped if settings for several for-

mat functions are being applied at the same time.

NOTE

☞

If “*****” appears as a setting, the Style1 func-

tion has already been applied to either a line in

the current text block (if the Block Format or the

Global Format function is being set) or a block

in the current text (if the Global Format function

is being set). Changing the setting will cancel

the setting that was previously applied.

☞

To return the function to its default setting

(NORMAL), press the space bar.

☞

To return to the text without changing the for-

matting, press

(OR hold down

and

press

NOTE

To apply several format settings at the same time,

continue pressing j or k to select the function,

then pressing m or g to select the desired setting.

Press n only after the necessary functions have

been set.

Length Margin Font Width Size

AUTO 1.10 HELSINKI A AUTO

04/13

STYLE1

NORMAL

NOTE

This step may be skipped if settings for several for-

mat functions are being applied at the same time.

Length Margin Font Width Size

AUTO 1.10 HELSINKI A AUTO

<<< P-touch >>>

Length Margin Font Width Size

AUTO 1.10 HELSINKI A AUTO

05/13

STYLE2

NORMAL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother P-touch 9600 Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother P-touch 9600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info