Bedienungsanleitung Brother P-touch 9600 (Seite 69 von 204) (Englisch)

498966

Zoom out

Zoom in

Vorherige Seite

1/204

Nächste Seite

Ch. 3 Functions

Functions

4 Press n to apply the setting.

Block Margin function

(B. MARGIN)

The width of the margins between text blocks

can be set between 0.00" and 12.00" (0.0 cm

and 30.0 cm). The left and right margins for

each text block will have a width that is the

specified setting. If the AUTO setting is selected,

the block margins will be 0.00" (0.0 cm) if only

one text block has been created and 0.13" (0.3

cm) if multiple text blocks have been created.

To change the setting for the Block Margin

function:

1 Hold down d and press 1.

2 Press j or k until B. MARGIN is dis-

played. The current setting is shown on the

left side of the display.

3 Press m or g until the desired setting is

displayed, or use the number keys to type in

the desired block margin width.

4 Press n to apply the setting.

Block Length function

(B. LENGTH)

Normally, the length of each text block auto-

matically adjusts to fit the length of the entered

text. However, with the Block Length function,

you can set each text block to a length between

0.25" and 38.84" (0.6 cm and 99.5 cm).

NOTE

☞

To return the function to its default setting

(AUTO), press the space bar.

☞

To change the setting in 0.1" (1.0 cm) steps,

hold down either m or g, and then release

the key when the desired setting is displayed.

☞

The tape length is displayed in the currently

selected unit of measurement (inches or centi-

meters). The unit of measurement can be

changed with the Setup functions. (Refer to refer

to page 74.)

☞

To return to the text without changing the for-

matting, press

(OR hold down

and

press

NOTE

To apply several format settings at the same time,

continue pressing j or k to select the function,

then pressing m or g to select the desired setting.

Press n only after the necessary functions have

been set.

NOTE

This step may be skipped if settings for several for-

mat functions are being applied at the same time.

NOTE

☞

To return the function to its default setting

(AUTO), press the space bar.

☞

To change the setting in 0.1" (1.0 cm) steps,

hold down either m or g, and then release

the key when the desired setting is displayed.

☞

The block margins are displayed in the cur-

rently selected unit of measurement (inches or

centimeters). The unit of measurement can be

changed with the Setup functions. (Refer to refer

to page 74.)

☞

To return to the text without changing the for-

matting, press

(OR hold down

and

press

NOTE

To apply several format settings at the same time,

continue pressing j or k to select the function,

then pressing m or g to select the desired setting.

Press n only after the necessary functions have

been set.

Length Margin Font Width Size

AUTO 1.10 HELSINKI A AUTO

11/13

B. MARGIN

AUTO

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother P-touch 9600 Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother P-touch 9600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info